I've got it solved finally. The new added slots on the physical library
were not yet allocated to the logical partition TSM is using. Which
explains why TSM didn't find them.
A simple restart of TSM did discover the new added slots afterwards.
Mvg,
Kurt
> -----Oorspronkelijk bericht-----
> Van: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Namens
Baker,
> Jane
> Verzonden: woensdag 1 augustus 2007 9:41
> Aan: ADSM-L AT VM.MARIST DOT EDU
> Onderwerp: Re: [ADSM-L] Extend library capacity
>
> We found when we changed the library config (only logically) they told
> us to re-configure, library defs, drives and paths but we didn't need
> to.
>
> We did need to run the 'update library serial=autodetect' to get it to
> find it's new serial number as it is somehow linked to the slot number
> or numbers???
>
> Hope you get it resolved soon!
>
> Jane.
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of
> BEYERS Kurt
> Sent: 01 August 2007 08:30
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] Extend library capacity
>
> Thanks for the answers.
>
> I was afraid that a redefinition of the library would be the answer.
> Otherwise I'll give it a go as soon as TSM is finished with it's daily
> maintenance tasks. Which will keep him busy for a few more hours.
>
> I've opened a PMR at IBM too, maybe they come up with something else
> while TSM is busy.
>
> Regards,
> Kurt
>
> > -----Oorspronkelijk bericht-----
> > Van: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Namens
> Wanda
> > Prather
> > Verzonden: dinsdag 31 juli 2007 18:11
> > Aan: ADSM-L AT VM.MARIST DOT EDU
> > Onderwerp: Re: [ADSM-L] Extend library capacity
> >
> > The document you reference is peculiar. It says the "server may
have
> to
> > be restarted or the library audited or possibly redefined", but it
> doesn't
> > make clear the cases where it needs to be redefined.
> >
> > AFAIK, when you change the number of slots in a TSM SCSI library,
you
> have
> > to delete the library and drive definitions and redefine them.
> >
> > Here's what I think you need to do:
> >
> > Check out your tapes with REMOVE=NO
> > Make a copy of your DEVCONFIG file
> > Delete your paths
> > delete your drives
> > delete your library
> > Use the commands in the copy of your DEVCONFIG file to recreate the
> > library and drive and path definitions. (leave the SERIAL # off the
> > define drive command, let TSM figure it out.) TSM will pick up the
> new
> > slots.
> >
> > CheCK YOUR tapes back in.
> > (You can make it easier by running a checkin for ALL tapes
> (search=yes) as
> > STATUS=SCRATch. TSM will skip those that shouldn't be scratch.
Then
> run
> > a second checkin for all tapes status=PRIVATE.
> >
> > Anybody got a different opinion?
> >
> > Wanda
> >
> >
> >
> >
> >
> >
> >
> >
> > > Hello,
> > >
> > > I've got the following setup:
> > >
> > > TSM server 5.4.0.3 on AIX5.3 TL5 (Extended Edition)
> > > Adic i2000 library
> > >
> > > The capacity of the library was extended from 500 to 600 slots by
> > > adding a license key. TSM was restarted afterwards and an audit of
> the
> > > ibrary was done , but TSM still only saw 500 instead of 600 slots.
> > > According to the following note, this is all that should be done:
> > >
> > >
>
http://www-1.ibm.com/support/docview.wss?%20%20%20%20%20rs=663&context=S
> > >
>
SGSG7&dc=D600&dc=DB520&dc=DB530&dc=D700&dc=DB500&dc=DB540&dc=DB510&dc=DB
> > >
550&q1=library+AND+change&uid=swg21203271&loc=en_US&cs=utf-8&lang=en
> > >
> > > The library and TSM server were rebooted too, but TSM still only
> sees
> > > 500 slots instead of 600 slots.
> > >
> > > What else should be done so that TSM detects the new added library
> > > slots?
> > >
> > > Thanks in advance,
> > > Kurt
> > >
> > > *** Disclaimer ***
> > >
> > > Vlaamse Radio- en Televisieomroep
> > > Auguste Reyerslaan 52, 1043 Brussel
> > >
> > > nv van publiek recht
> > > BTW BE 0244.142.664
> > > RPR Brussel
> > > http://www.vrt.be/disclaimer
> > >
> > >
> *** Disclaimer ***
>
> Vlaamse Radio- en Televisieomroep
> Auguste Reyerslaan 52, 1043 Brussel
>
> nv van publiek recht
> BTW BE 0244.142.664
> RPR Brussel
> http://www.vrt.be/disclaimer
>
>
>
>
>
>
> Please check that this email is addressed to you. If not, you should
> delete it immediately as its contents may be confidential and its
> disclosure, copying or distribution unlawful.
>
> C. & J. Clark International Limited takes steps to prevent the
> transmission of electronic viruses but responsibility for screening
> incoming messages and the risk of such transmission lies with the
> recipient.
>
> C. & J. Clark International Limited Trading as Clarks Registered in
> England number 141015.
> Registered office 40 High Street, Street, Somerset. BA16 0EQ. England.
>
> This message has been scanned for viruses by BlackSpider MailControl -
> www.blackspider.com
*** Disclaimer ***
Vlaamse Radio- en Televisieomroep
Auguste Reyerslaan 52, 1043 Brussel
nv van publiek recht
BTW BE 0244.142.664
RPR Brussel
http://www.vrt.be/disclaimer
|