ADSM-L

Re: [ADSM-L] TSM and Windows Cluster Environment

2007-07-12 16:38:02
Subject: Re: [ADSM-L] TSM and Windows Cluster Environment
From: Wanda Prather <wprather AT JASI DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 12 Jul 2007 15:35:22 -0500
WOW!!
I always wondered if it wasn't possible to do this without the failover.
Thanks!


> We deal with enough Windows clusters that we have developed a batch file
> to
> run on each potential failover host of a vnode within the cluster, to get
> the services set up (you still need to manually configure the cluster
> services that will control the local Windows services - I haven't scripted
> that part of it because we use both Windows clustering and Veritas
> clustering, and I haven't had the time to devote to it).
>
> This batch file allows you to set up the services on the failover
> platforms
> that are not the current host of the virtual node, WITHOUT failing them
> over!
>
> You do still need to plan ahead - you'll need to know what the cluster
> name
> is, whether or not you want all of the drives in the vnode backed up under
> one TSM node name, which drives are in the vnode, and which HTTP port the
> client acceptor will listen on (keeping in mind that every vnode in the
> cluster needs to use a unique HTTP port). It's assumed that the name of
> the
> vnode is the name of the TSM node, unless individual drives in the vnode
> are so big they need individual TSM nodes to handle them.
>
> Copy the following into a batch file (we call ours tsmclsvc.bat), make
> appropriate modifications, and then just copy the batch file onto each
> cluster server on which you need to set up clustered services.
> Double-click, and away you go. Remember, it needs to be run for EACH
> vnode,
> on EACH physical host that vnode can fail over to. So if you have three
> vnodes and two physical servers in your cluster, you'll need to run it six
> times - three on each physical server.
>
> @echo off
> echo.
> echo.
> echo Is this physical host machine currently in control of the vnode and
> its drives?
> echo i.e. Can you access the vnode's clustered drive from here at the
> moment?
> echo.
> set /p HOST=?
> echo.
> if (%HOST%) == () goto NOHOST
>
> echo.
> echo Enter the name of the virtual server (all caps).
> echo.
> set /p NODENAME=Nodename:
> echo.
> if (%NODENAME%) == () goto NONODE
>
> echo.
> echo Enter the name of the cluster.
> echo.
> set /p CLUSTERNAME=Clustername:
> echo.
> if (%CLUSTERNAME%) == () goto NOCLUST
>
> echo.
> echo Enter the drive letter in the virtual server
> echo where the dsm.opt file goes (no colon) (e.g. G).
> echo.
> set /p DRIVE=Drive:
> echo.
> if (%DRIVE%) == () goto NODRIVE
>
> echo.
> echo If there are other drives in this vnode, BUT they have so much data
> that
> echo you need multiple TSM nodes to back them up, type "yes" at the
> prompt.
> echo This will change the TSM node name to "%NODENAME%-%DRIVE%", and
> echo this TSM node will ONLY back up the one drive you specified above.
> echo.
> echo If the vnode only has a single drive, or you want to back up all
> echo of its drives under one TSM node, just press Enter.
> echo.
> echo Most of the time you should just press Enter here.
> echo.
> set /p RESTRICT=Restrict?
> if (%RESTRICT%) == () goto OTHERS
> set NODENAME=%NODENAME%-%DRIVE%
> goto MORE
>
> :OTHERS
>
> echo.
> echo Enter any other drive letters included in this virtual server (not
> the
> whole cluster), WITH colons.
> echo Separate multiple drives with spaces (e.g. H: J: K:).
> echo All of these drives will back up under the same TSM node, and should
> fail over together.
> echo Just hit the Enter key for no additional drives.
> echo.
> set /p OTHERDRIVES=OtherDrives:
> echo.
> goto :MORE
>
> :MORE
>
> echo.
> echo Enter the HTTPPORT that this node will use (e.g. 1591).
> echo Remember, no two virtual servers in a cluster can use the same port.
> echo.
> set /p HTTPPORT=HTTPPORT:
> echo.
> if (%HTTPPORT%) == () goto NOHTTPPORT
>
> echo.
> echo Enter the TSM server that will back up this node.
> echo Use tsm1, tsm2, tsm3, ...
> echo (Update the above line to correspond with the definitions listed in
> the script below)
> echo.
> set /p SERVERNAME=Servername:
> if (%SERVERNAME%) == () goto NOSERVER
>
> rem
> *******************************************************************************
> rem %1 = SERVERNAME
> rem %2 = CLUSTERNAME
> rem %3 = Shared DSM.OPT location
> rem %4 = HTTPPORT
> rem
> *******************************************************************************
>
> if (%HTTPPORT%) == (1591) set TCPCLPORT=1571
> if (%HTTPPORT%) == (1592) set TCPCLPORT=1572
> if (%HTTPPORT%) == (1593) set TCPCLPORT=1573
> if (%HTTPPORT%) == (1594) set TCPCLPORT=1574
> if (%HTTPPORT%) == (1595) set TCPCLPORT=1575
> if (%HTTPPORT%) == (1596) set TCPCLPORT=1576
> if (%HTTPPORT%) == (1597) set TCPCLPORT=1577
> if (%HTTPPORT%) == (1598) set TCPCLPORT=1578
> if (%HTTPPORT%) == (1599) set TCPCLPORT=1579
>
> if (%SERVERNAME%) == (tsm1) set Svr=TSMSRV1
> if (%SERVERNAME%) == (tsm1) set SVRADDR=TSMHOST1.your.company.com
> if (%SERVERNAME%) == (tsm1) set PORT=1500
> if (%SERVERNAME%) == (tsm1) goto NEXT
> if (%SERVERNAME%) == (tsm2) set Svr=TSMSRV2
> if (%SERVERNAME%) == (tsm2) set SVRADDR=TSMHOST2.your.company.com
> if (%SERVERNAME%) == (tsm2) set PORT=1500
> if (%SERVERNAME%) == (tsm2) goto NEXT
> if (%SERVERNAME%) == (tsm3) set Svr=TSMSRV3
> if (%SERVERNAME%) == (tsm3) set SVRADDR=TSMHOST2.your.company.com
> if (%SERVERNAME%) == (tsm3) set PORT=1505
> if (%SERVERNAME%) == (tsm3) goto NEXT
> rem Modify and expand the above list to fit your environment
>
> goto WRONGSRVR
>
> :NEXT
>
> rem
> *******************************************************************************
> rem Make sure we are in the right directory
> rem
> *******************************************************************************
> rem if NOT exist .\DSMCUTIL.EXE GOTO WRONGDIR
>
> rem
> *******************************************************************************
> rem Determine where the TSM client is installed
> rem
> *******************************************************************************
> if exist C:\PROGRA~1\TIVOLI\TSM\BACLIENT\DSMCUTIL.EXE set
> TSMDIR=C:\PROGRA~1\TIVOLI\TSM\BACLIENT
> if exist C:\PROGRA~1\TIVOLI\TSM\BACLIENT\DSMCUTIL.EXE GOTO CHECK
> if exist C:\TSM\BACLIENT\DSMCUTIL.EXE set TSMDIR=C:\TSM\BACLIENT
> if exist C:\TSM\BACLIENT\DSMCUTIL.EXE GOTO CHECK
>
> GOTO NOINSTALL
>
> :CHECK
>
> if (%HOST%) == (Y) goto MAIN1A
> if (%HOST%) == (Yes) goto MAIN1A
> if (%HOST%) == (y) goto MAIN1A
> if (%HOST%) == (yes) goto MAIN1A
> if (%HOST%) == (YES) goto MAIN1A
>
> if (%HOST%) == (N) goto MAIN1B
> if (%HOST%) == (No) goto MAIN1B
> if (%HOST%) == (n) goto MAIN1B
> if (%HOST%) == (no) goto MAIN1B
> if (%HOST%) == (NO) goto MAIN1B
>
> goto TRYAGAIN
>
> rem
> *******************************************************************************
> rem   Main process: current server is host of vnode
> rem
> *******************************************************************************
>
> :MAIN1A
>
> if exist %DRIVE%:\TSM\DSM.OPT GOTO OPTEXIST
> if not exist %DRIVE%:\TSM md %DRIVE%:\TSM
>
> echo.                                                 >>
> %DRIVE%:\TSM\DSM.OPT
> echo ********************************************************     >>
> %DRIVE%:\TSM\DSM.OPT
> echo * IBM Tivoli Storage Manager                     >>
> %DRIVE%:\TSM\DSM.OPT
> echo * Option file generated by tsmclsvX.bat                >>
> %DRIVE%:\TSM\DSM.OPT
> echo ********************************************************     >>
> %DRIVE%:\TSM\DSM.OPT
> echo.                                                 >>
> %DRIVE%:\TSM\DSM.OPT
> echo * Communication Method                           >>
> %DRIVE%:\TSM\DSM.OPT
> echo COMMMETHOD               TCPip                         >>
> %DRIVE%:\TSM\DSM.OPT
> echo TCPSERVERADDRESS         %SVRADDR%               >>
> %DRIVE%:\TSM\DSM.OPT
> echo TCPPORT                  %PORT%                        >>
> %DRIVE%:\TSM\DSM.OPT
> echo TCPCLIENTPORT            %TCPCLPORT%                   >>
> %DRIVE%:\TSM\DSM.OPT
> echo HTTPPORT                 %HTTPPORT%              >>
> %DRIVE%:\TSM\DSM.OPT
> echo.                                                 >>
> %DRIVE%:\TSM\DSM.OPT
> echo * Client Node                                    >>
> %DRIVE%:\TSM\DSM.OPT
> echo NODENAME                 %NODENAME%              >>
> %DRIVE%:\TSM\DSM.OPT
> echo.                                                 >>
> %DRIVE%:\TSM\DSM.OPT
> echo * Access and Performance Options                       >>
> %DRIVE%:\TSM\DSM.OPT
> echo MANAGEDSERVICES          WEBCLIENT SCHEDULE            >>
> %DRIVE%:\TSM\DSM.OPT
> echo passwordaccess           generate                      >>
> %DRIVE%:\TSM\DSM.OPT
> echo tcpwindowsize            63                      >>
> %DRIVE%:\TSM\DSM.OPT
> echo tcpbuffsize              32                      >>
> %DRIVE%:\TSM\DSM.OPT
> echo txnbytelimit             25600                         >>
> %DRIVE%:\TSM\DSM.OPT
> echo largecommbuffers         no                      >>
> %DRIVE%:\TSM\DSM.OPT
> echo memoryefficient          no                      >>
> %DRIVE%:\TSM\DSM.OPT
> echo.                                                 >>
> %DRIVE%:\TSM\DSM.OPT
> echo * Cluster node                                   >>
> %DRIVE%:\TSM\DSM.OPT
> echo clusternode              yes                     >>
> %DRIVE%:\TSM\DSM.OPT
> echo.                                                 >>
> %DRIVE%:\TSM\DSM.OPT
> echo * Log File Retention                             >>
> %DRIVE%:\TSM\DSM.OPT
> echo errorlogr                10 d                    >>
> %DRIVE%:\TSM\DSM.OPT
> echo schedlogr                10 d                    >>
> %DRIVE%:\TSM\DSM.OPT
> echo.                                                 >>
> %DRIVE%:\TSM\DSM.OPT
> echo * Domain Statement                               >>
> %DRIVE%:\TSM\DSM.OPT
> echo domain                   %DRIVE%: %OTHERDRIVES%        >>
> %DRIVE%:\TSM\DSM.OPT
> echo.                                                 >>
> %DRIVE%:\TSM\DSM.OPT
> echo * log files                                >> %DRIVE%:\TSM\DSM.OPT
> echo schedlogname             %DRIVE%:\tsm\dsmsched.log     >>
> %DRIVE%:\TSM\DSM.OPT
> echo errorlogname             %DRIVE%:\tsm\dsmerror.log     >>
> %DRIVE%:\TSM\DSM.OPT
>
> echo.
> echo Option file for %NODENAME% is configured.
>
> c:
> cd %TSMDIR%
>
> .\dsmcutil.exe install /name:"TSM Scheduler: %NODENAME%"
> /clientdir:"%TSMDIR%" /optfile:%DRIVE%:\tsm\dsm.opt /node:%NODENAME%
> /commmethod:tcpip /commserver:%SVRADDR% /commport:%PORT%
> /password:PASSWORD
> /validate:no /autostart:no /startnow:no /clusternode:yes
> /clustername:%CLUSTERNAME%
>
> echo.
> echo TSM Scheduler Service for %NODENAME% is configured.
> rem
> *******************************************************************************
> rem The ping statements emulate Sleep, to allow the registry to fully
> update before the next command runs.
> rem
> *******************************************************************************
> ping 127.0.0.1 -n 2 -w 1000 > nul
>
> .\dsmcutil.exe install cad /name:"TSM Client Acceptor: %NODENAME%"
> /clientdir:"%TSMDIR%" /optfile:%DRIVE%:\tsm\dsm.opt /node:%NODENAME%
> /password:PASSWORD /validate:yes /autostart:no /startnow:no
> /httpport:%HTTPPORT% /cadschedname:"TSM Scheduler: %NODENAME%"
>
> echo.
> echo TSM Client Acceptor Service for %NODENAME% is configured.
> ping 127.0.0.1 -n 2 -w 1000 > nul
>
> .\dsmcutil.exe install remoteagent /name:"TSM Rmt Agent: %NODENAME%"
> /optfile:%DRIVE%:\tsm\dsm.opt /node:%NODENAME% /password:PASSWORD
> /validate:no /startnow:no /partnername:"TSM Client Acceptor: %NODENAME%"
>
> echo.
> echo TSM Remote Client Agent Service for %NODENAME% is configured.
> ping 127.0.0.1 -n 2 -w 1000 > nul
>
> .\dsmcutil.exe updatepw /node:%NODENAME% /commMethod:tcpip
> /commServer:%SVRADDR% /commPort:%PORT% /password:PASSWORD
> /oldpassword:PASSWORD /updateonserver:yes /clusternode:yes
> /clustername:%CLUSTERNAME% /validate:yes
>
> echo.
> echo Password is reset.
>
> goto CLEANUP
>
> rem
> *******************************************************************************
> rem   Main process: current server is NOT host of vnode
> rem
> *******************************************************************************
>
> :MAIN1B
>
> if not exist C:\TSM\%NODENAME% md C:\TSM\%NODENAME%
> if exist C:\TSM\%NODENAME%\DSM.OPT del C:\TSM\%NODENAME%\DSM.OPT
>
> echo.                                                 >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo ********************************************************     >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo * IBM Tivoli Storage Manager                     >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo ********************************************************     >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo.                                                 >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo * Communication Method                           >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo COMMMETHOD               TCPip                         >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo TCPSERVERADDRESS         %SVRADDR%               >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo TCPPORT                  %PORT%                        >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo TCPCLIENTPORT            %TCPCLPORT%                   >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo HTTPPORT                 %HTTPPORT%              >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo.                                                 >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo * Client Node                                    >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo NODENAME                 %NODENAME%              >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo.                                                 >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo * Access and Performance Options                       >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo MANAGEDSERVICES          WEBCLIENT SCHEDULE            >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo passwordaccess           generate                      >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo tcpwindowsize            63                      >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo tcpbuffsize              32                      >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo txnbytelimit             25600                         >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo largecommbuffers         no                      >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo memoryefficient          no                      >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo.                                                 >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo * Cluster node                                   >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo clusternode              yes                     >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo.                                                 >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo * Log File Retention                             >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo errorlogr                10 d                    >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo schedlogr                10 d                    >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo.                                                 >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo * Domain Statement                               >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo domain                   %DRIVE%: %OTHERDRIVES%        >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo.                                                 >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo * log files                                >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo schedlogname             %DRIVE%:\tsm\dsmsched.log     >>
> C:\TSM\%NODENAME%\DSM.OPT
> echo errorlogname             %DRIVE%:\tsm\dsmerror.log     >>
> C:\TSM\%NODENAME%\DSM.OPT
>
> echo.
> echo Option file for %NODENAME% is configured.
>
> c:
> cd %TSMDIR%
>
> .\dsmcutil.exe install /name:"TSM Scheduler: %NODENAME%"
> /clientdir:"%TSMDIR%" /optfile:C:\tsm\%NODENAME%\dsm.opt /node:%NODENAME%
> /commmethod:tcpip /commserver:%SVRADDR% /commport:%PORT%
> /password:PASSWORD
> /validate:no /autostart:no /startnow:no /clusternode:yes
> /clustername:%CLUSTERNAME%
>
> echo.
> echo TSM Scheduler Service for %NODENAME% is configured.
> rem
> *******************************************************************************
> rem The ping statements emulate Sleep, to allow the registry to fully
> update before the next command runs.
> rem
> *******************************************************************************
> ping 127.0.0.1 -n 2 -w 1000 > nul
>
> .\dsmcutil.exe install cad /name:"TSM Client Acceptor: %NODENAME%"
> /clientdir:"%TSMDIR%" /optfile:C:\tsm\%NODENAME%\dsm.opt /node:%NODENAME%
> /password:PASSWORD /validate:yes /autostart:no /startnow:no
> /httpport:%HTTPPORT% /cadschedname:"TSM Scheduler: %NODENAME%"
>
> echo.
> echo TSM Client Acceptor Service for %NODENAME% is configured.
> ping 127.0.0.1 -n 2 -w 1000 > nul
>
> .\dsmcutil.exe install remoteagent /name:"TSM Rmt Agent: %NODENAME%"
> /optfile:C:\tsm\%NODENAME%\dsm.opt /node:%NODENAME% /password:PASSWORD
> /validate:no /startnow:no /partnername:"TSM Client Acceptor: %NODENAME%"
>
> echo.
> echo TSM Remote Client Agent Service for %NODENAME% is configured.
> ping 127.0.0.1 -n 2 -w 1000 > nul
>
> .\dsmcutil.exe updatepw /node:%NODENAME% /commMethod:tcpip
> /commServer:%SVRADDR% /commPort:%PORT% /password:PASSWORD
> /oldpassword:PASSWORD /updateonserver:yes /clusternode:yes
> /clustername:%CLUSTERNAME% /validate:yes
>
> echo.
> echo Password is reset.
> ping 127.0.0.1 -n 2 -w 1000 > nul
>
> rem
> *******************************************************************************
> rem Now update the services so the referenced option file will be in the
> correct place when a failover happens
> rem
> *******************************************************************************
>
> .\dsmcutil.exe update /name:"TSM Scheduler: %NODENAME%"
> /optfile:%DRIVE%:\tsm\dsm.opt
> ping 127.0.0.1 -n 2 -w 1000 > nul
>
> .\dsmcutil.exe update /name:"TSM Client Acceptor: %NODENAME%"
> /optfile:%DRIVE%:\tsm\dsm.opt
> ping 127.0.0.1 -n 2 -w 1000 > nul
>
> .\dsmcutil.exe update /name:"TSM Rmt Agent: %NODENAME%"
> /optfile:%DRIVE%:\tsm\dsm.opt
>
> goto CLEANUP
>
> :NOHOST
> echo.
> echo.
> echo You must enter Yes or No. Find out if the server you are logged
> echo in to is currently the host of the vnode, and restart the batch file.
> echo.
> echo.
> pause
> goto end
>
> :WRONGDIR
> echo.
> echo.
> echo tsmclsv1.bat must be run from the \TSM\BACLIENT directory.
> echo.
> echo.
> echo Please change directory to the BACLIENT directory.
> echo.
> echo.
> pause
> goto end
>
> :NONODE
> echo.
> echo The Virtual Server name is missing.
> echo.
> echo Re-execute tsmclsvc.bat and include the name of the clustered
> echo virtual node.
> echo.
> echo.
> pause
> goto end
>
> :NOCLUST
> echo.
> echo The Cluster Name is missing.
> echo.
> echo Re-execute tsmclsvc.bat and include the name of the cluster that the
> echo virtual node is a part of.
> echo.
> echo.
> pause
> goto end
>
> :NODRIVE
> echo.
> echo The DSM.OPT Volume letter is missing.
> echo.
> echo Re-execute tsmclsvc.bat and include the volume letter
> echo where the DSM.OPT file should reside.
> echo.
> echo.
> pause
> goto end
>
> :NOHTTPPORT
> echo.
> echo The HTTPPORT paramter is missing.
> echo.
> echo Re-execute tsmclsvc.bat and include the HTTPPORT.
> echo Example: 1591
> echo.
> echo.
> pause
> goto end
>
> :NOSERVER
> echo.
> echo The TSM Server abbreviation is missing.
> echo.
> echo Re-execute tsmclsvc.bat and include the TSM Server name that the
> echo clustered node will back up to.
> echo.
> echo.
> pause
> goto end
>
> :WRONGSRVR
> echo.
> echo ServerName parameter is incorrect, or is capitalized.
> echo.
> echo Re-execute tsmclsvc.bat and input the TSM server name as requested,
> in
> lower case.
> echo.
> echo.
> pause
> goto end
>
> :NOINSTALL
> echo.
> echo There doesn't seem to be a TSM client install in the default
> locations.
> echo Please ensure that the TSM client is installed in C:\TSM, or
> C:\Program Files\Tivoli\TSM
> echo and run this script again.
> echo.
> pause
> goto end
>
> :OPTEXIST
> echo.
> echo There is already a DSM.OPT file in %DRIVE%:\TSM\.
> echo.
> echo This batch file is for new configurations only. If there are no
> services for
> echo this vnode installed yet, you may delete the DSM.OPT file in
> %DRIVE%:\TSM\
> echo and run this script again.
> echo.
> pause
> goto end
>
> :TRYAGAIN
> echo.
> echo Sorry, you need to answer yes or no to the first question.
> echo Please try again.
> echo.
> pause
> goto end
>
> :CLEANUP
> if exist "C:\Program Files\VERITAS\Cluster Manager\bin\ClusterManager.exe"
> vxvssprovider /unregserver
> if exist "D:\Program Files\VERITAS\Cluster Manager\bin\ClusterManager.exe"
> vxvssprovider /unregserver
> pause
> goto end
>
> :USAGE
> echo.
> echo Usage rules;
> echo tsmclsvc.bat
> echo.
> echo   Double-click on this batch file  when logged
> echo     in to a physical server that can be a host to the vnode being set
> up.
> echo.
> echo   The node must already be defined on the TSM server.
> echo.
> echo   You will be prompted for the following parameters:
> echo.
> echo     Host (yes/no):     Is the machine you are logged in to currently
> hosting the vnode?
> echo.
> echo     Nodename:          The name of the node you are setting up, as
> defined on the TSM server
> echo.
> echo     clustername:       The name of the cluster that the node is part
> of
> echo.
> echo     Drive:             Volume letter in the vnode that the dsm.opt
> file will reside on, e.g. L
> echo.
> echo     Restricted (yes?): Do you want to restrict this TSM node to back
> up only one drive?
> echo.
> echo     OtherDrives:       Any other drives in the vnode, e.g. M: N:
> echo.
> echo     HTTPport:          Httpport CAD service will listen on, e.g.
> 1591,
> 1592,..
> echo.
> echo     Servername:        The TSM server that this node will back up to
> echo.
>
> :end
>
> Robben Leaf
> Enterprise Storage Backup and Retention
> 651-962-2698
> robben.leaf AT usbank DOT com
>
>
>
>              "Bos, Karel"
>              <Karel.Bos@ATOSOR
>              IGIN.COM>                                                  To
>              Sent by: "ADSM:           ADSM-L AT VM.MARIST DOT EDU
>              Dist Stor                                                  cc
>              Manager"
>              <[email protected]                                     Subject
>              .EDU>                     Re: [ADSM-L] TSM and Windows
>                                        Cluster Environment
>
>              07/12/2007 10:26
>              AM
>
>
>              Please respond to
>              "ADSM: Dist Stor
>                  Manager"
>              <[email protected]
>                    .EDU>
>
>
>
>
>
>
> Hi,
>
> Yep, we and others have.
>
> What are the problems you are running into? Installing ITSM clients in a
> cluster is described in the ITSM client documentation.
>
> Regards,
>
> Karel
>
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf 
> Of
> Richard Mochnaczewski
> Sent: donderdag 12 juli 2007 17:19
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: TSM and Windows Cluster Environment
>
> Hi *,
>
> Has anyone successfully implemented TSM in a Windows Cluster environment
> ? We are running into various problems when trying to configure the TSM
> client on certain servers in the cluster and IBM is not being very
> helpful.
>
> TSM Server : 5.3.3.0 running on AIX 5.2 ML9
>
>
> Rich
>
>
>
> ------------------------------------------------------------------------------
> Electronic Privacy Notice. This e-mail, and any attachments, contains
> information that is, or may be, covered by electronic communications
> privacy laws, and is also confidential and proprietary in nature. If you
> are not the intended recipient, please be advised that you are legally
> prohibited from retaining, using, copying, distributing, or otherwise
> disclosing this information in any manner. Instead, please reply to the
> sender that you have received this communication in error, and then
> immediately delete it. Thank you in advance for your cooperation.
> ==============================================================================
>

<Prev in Thread] Current Thread [Next in Thread>