ADSM-L

Re: [ADSM-L] Cannot define a path to a drive: help, please?

2007-06-19 10:06:39
Subject: Re: [ADSM-L] Cannot define a path to a drive: help, please?
From: Chris McKay <Chris.McKay AT YCDSB DOT CA>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Tue, 19 Jun 2007 10:05:36 -0400
Hi Joni,

I did have this exact problem, but with a Windows server. What type of
Library do you have??  Did you update any firmware lately?? We have a 3584
library, and found the firmware was the problem. I had to downgrade the
firmware, let it detect the drive define the drive, then update the
firmware again.

Hopefully this may be of some assistance.

Take Care,

Chris

"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU> writes:
>Hi Everyone!
>
>I have a TSM server on AIX 5.3 and TSM is 5.3.4.2.  I have defined a
>drive: vlto2-68 with define drive cdlb_dev vlto2-68.
>
>                               Library Name: CDLB_DEV
>                                  Drive Name: VLTO2-68
>                                 Device Type: UNKNOWN
>                                     On-Line: Yes
>                                Read Formats:
>                               Write Formats:
>                                     Element:
>                                 Drive State: UNKNOWN
>                                 Volume Name:
>                                Allocated to:
>                                         WWN:
>                               Serial Number:
>
>I then tried to define a path to the drive and it will not let me:
>
>06/19/07 09:53:26     ANR2017I Administrator LIDZR8V issued command:
>DEFINE PATH
>                       tsmdev vlto2-68 srctype=server desttype=drive
>library=cd
>                       lb_dev device=/dev/rmt68  (SESSION: 497257)
>06/19/07 09:53:26     ANR8972E DEFINE PATH: Unable to find the element
>number
>                       for drive VLTO2-68 in library CDLB_DEV.  (SESSION:
>
>                       497257)
>
>I have already defined 40 other drives & their paths successfully, but
>this one is giving me issues.  From the server it does appear as:
>
>  rmt68            U0.1-P2-I2/Q1-W2102000D77BD375D-LB000000000000   IBM
>3580 Ultrium Tape Drive (FCP)
>
>        Manufacturer................IBM
>        Machine Type and Model......ULT3580-TD2
>        Serial Number...............1182255815
>        Device Specific.(FW)........53Y2
>
>And since this is a virtual drive I then looked at the CDL and the serial
>numbers do match.
>
>Has anyone ever had this issue?  Does anyone have any suggestions on what
>I might be doing wrong?  Thanks in advance!
>
>********************************
>Joni Moyer
>Highmark
>Storage Systems, Storage Mngt Analyst III
>Phone Number: (717)302-9966
>Fax: (717) 302-9826
>joni.moyer AT highmark DOT com
>********************************




______________________________________________
This message is for the sole use of the intended recipients and may contain 
confidential and privileged information. Any unauthorized review, use, 
disclosure or distribution is prohibited. If you are not an intended recipient, 
please contact the sender by reply email and destroy all copies of the original 
message. Thank you for your cooperation.