And make darn sure you use the install.exe program with the driver to
install the driver.  Do not do, as I did, and try to install the drivers
through device manager.  You will be very sorry if you try that!

 


Kelly J. Lipp
VP Manufacturing & CTO
STORServer, Inc.
485-B Elkton Drive
Colorado Springs, CO 80907
719-266-8777
lipp AT storserver DOT com

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Prather, Wanda
Sent: Wednesday, November 01, 2006 9:01 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] DEFine LIBRary IBM TS3310

You should not be using Windows removable storage manager.
DISABLE the Windows removeable storage manager service.
INSTALL the IBM driver for the TS3310 (download from
www.storage.ibm.com) and the LTO drives.
Do not try to run 5.3.0.0; apply maintenance to upgrade to TSM 5.3.3.
 
Then use the ISC to define the library & drives, works fine.
 

________________________________

From: ADSM: Dist Stor Manager on behalf of TSM User
Sent: Wed 11/1/2006 10:37 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: DEFine LIBRary IBM TS3310



I am installing TSM 5.3. with an unit IBM TS3310 with 2 drives via FC.
In
W2003



When I define the library appears: "changer0 is nor reconized by windows
removable storage manager"



Some idea????



Thank you