Hi Robin,
Thanks for the reply !!
This error is not happening in exclusivity with this two device files it also
happening with other device files...
There are two drives per hba, from a total of eight drives.
I will try to recreate the device files... They are STK 9840B ...
Do you know if these drives have something special at OS Level that must be set
before or during the creation of the device files... ¿?
Thanks!!
Iban Bernaldo De Quiros Y Marquez
Technical Specialist
Sun Microsystems, Inc.
Serrano Galvache, 56
Madrid 28033 ES
Phone +34 91 767 6233
Mobile + 34 659 01 91 12
Email Iban.Bernaldodequiros AT Sun DOT COM
-----Mensaje original-----
De: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] En nombre de
Robin Sharpe
Enviado el: lunes, 31 de julio de 2006 16:34
Para: ADSM-L AT VM.MARIST DOT EDU
Asunto: Re: [ADSM-L] TSM Blocks Device Files in HP-UX after using it...
Hi Bernaldo,
We also run TSM on HP-UX. I don't recall ever seeing that exact message, but
my guess is you either have a hardware problem with those two devices (or
something along the path to those devices... are they on the same FC adapter or
SCSI bus?),
-- OR --
HP-UX has renumbered the device files. I have had that happen, and I'm not
sure why... To be sure, you should do an 'ioscan -fnC tape' and compare it to
the files in /dev/rmt ('ls -l /dev/rmt'). If the devices have been givien new
instance numbers, I have found that the easiest, surest fix is to delete the
drives and paths from TSM and redefine them. You should also remove any old
unused special files from /dev/rmt by doing 'rmsf -a /dev/rmt/23m' (for
example). That command will remove the definition from the kernel and all of
the special files that were associated with that device... 23m, 23mn, 23mb,
23mnb.
HTH
Regards,
Robin Sharpe
Berlex Labs
"Bernaldo de
Quiros, Iban 1"
<iban.bernaldodeq To
uiros AT SUN DOT COM> ADSM-L AT VM.MARIST DOT EDU
Sent by: "ADSM: cc
Dist Stor
Manager" Subject
<[email protected] TSM Blocks Device Files in HP-UX
.EDU> after using it...
07/31/2006 05:27
AM
Please respond to
"ADSM: Dist Stor
Manager"
<[email protected]
.EDU>
Hi Everyone !!
Did anyone got this error on TSM ¿? any information or GOTCHA's ¿?
07/28/06 12:54:47 ANR9999D mmsext.c(1360): ThreadId<70> Unable to
obtain
model type for '/dev/rmt/25m', rc = 30 Callchain
follows:
0000000000d18e6f outDiagf+0x25f <- 0000000000e7005b
ExtMountVolume+0xe53 <- 000000000088fbff
MmsMountVolume+0x3ff <- 0000000000e0a0c7
PvrGtsOpen+0x9a7
<- 0000000000e5fa07 TapiOpen+0x247 <- 000000000083ce1f
AgentThread+0x7d7 <- 000000000012edb3
StartThread+0x17b
<- 000000000006b47b *UNKNOWN* <- (SESSION: 506)
07/28/06 15:58:00 ANR9999D mmsext.c(1360): ThreadId<60> Unable to
obtain
model type for '/dev/rmt/23m', rc = 30 Callchain
follows:
0000000000d18e6f outDiagf+0x25f <- 0000000000e7005b
ExtMountVolume+0xe53 <- 000000000088fbff
MmsMountVolume+0x3ff <- 0000000000e0a0c7
PvrGtsOpen+0x9a7
<- 0000000000e5fa07 TapiOpen+0x247 <- 000000000083ce1f
AgentThread+0x7d7 <- 000000000012edb3
StartThread+0x17b
<- 000000000006b47b *UNKNOWN* <- (SESSION: 31)
After appearing this issues on actlog, TSM do not release the device file, so
device file remains busy. The only solution that I find at the moment is to
halt the TSM server to release device files.
When I re-start the TSM it could access the device files normally until this
issue occurs another time...
OS VERSION HP-UX 11.00
TSM 5.2.6.3
Using HP-UX Generic Driver to access tapes (stape).
Working with GRESHAM EDT 7.4.0.5.
Any help will be appreciated.
Thanks in Advance,
Regards,
Ibán Bernaldo de Quirós Márquez
Technical Specialist
cell: + 34 659 01 91 12
Sun Microsystems Iberia
|