Make sure that you have the "Mount Limit" set correctly in your 3592 device 
class...

3592-E05 is not a WORM drive...

-Jeff



-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
Zoltan Forray/AC/VCU
Sent: Monday, July 31, 2006 12:36 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Configuring new 3592-E05 drives


We finally got our 3592-E05 drives installed and attached to the SAN in
our 3494 library.

Now I am trying to figure out how to get them to work !   Is there
something special about configuring TSM to use them ?

The server is 5.3.2.3 on AIX.

I did the cfgmgr and the smitty devices to define them to
TSM...................
I bounced the TSM server..............
Defined the DEVICE CLASS 3592.
Defined the paths..........
Defined the storage pool........
Did a:  LABEL libv 3494ATL 085000 checkin=scr devtype=3592
and got the error:

7/31/2006 1:33:55 PM ANR8847E No  3592-type drives are currently available
in library 3494ATL.

Also, looking through the Admin Ref/Guide, there is constant talk about
3592 WORM drives ?

What am I missing ?


This e-mail communication and any attachments may contain confidential and 
privileged information for the use of the designated recipients named above. If 
you are not the intended recipient, you are hereby notified that you have 
received this communication in error and that any review, disclosure, 
dissemination, distribution or copying of it or its contents is prohibited. As 
required by federal and state laws, you need to hold this information as 
privileged and confidential. If you have received this communication in error, 
please notify the sender and destroy all copies of this communication and any 
attachments.