FW: Expire Inventory
2006-02-20 07:01:26
Hello
I have a Windows 2003 TSM server with LTO2 and 3 tape drives with
Ultrium driver 6.0.8.2, everytime it reboots it loses the ultrium device
drivers on some of the LTO2 and 3 tape drives. The actual SCSI ids
change i.e. lb0.1.0.9 then after reboot it becomes lb0.1.0.10. Dioes
anyone know why these SCSI IDs are changing?
Persistent binding is on
Removable storage manager is off
Thanks
Ian
_____________________________
Ian Smith
SAN/TSM Specialist
_____________________________________________________________
This email (including any attachments to it) is confidential, legally
privileged, subject to copyright and is sent for the personal attention of the
intended recipient only. If you have received this email in error, please
advise us immediately and delete it. You are notified that disclosing, copying,
distributing or taking any action in reliance on the contents of this
information is strictly prohibited. Although we have taken reasonable
precautions to ensure no viruses are present in this email, we cannot accept
responsibility for any loss or damage arising from the viruses in this email or
attachments. We exclude any liability for the content of this email, or for the
consequences of any actions taken on the basis of the information provided in
this email or its attachments, unless that information is subsequently
confirmed in writing. If this email contains an offer, that should be
considered as an invitation to treat.
_____________________________________________________________
|
|
|