Re: AW: [ADSM-L] Automating server scripts
2006-02-14 19:51:29
You'll want to use the command "SERIAL" at the end of each of the other
scripts. In theory, this is supposed to be implied.
Ignoring the reasons why I'm migrating before backing up,
here's an example of what I use:
TSM:>q scr backmig_STG f=raw
* SCRIPT BACKMIG_STG to backup and migrate storage pools
select SCHEDULE_NAME from ADMIN_SCHEDULES where
SCHEDULE_NAME='EXITIFEXIST'
IF (RC_OK) exit
PARALLEL
UPD STG DISKPOOL MIGPRO=5 HI=65 LO=5
UPD STG DISKPOOL_NOVLT MIGPRO=3 HI=75 LO=5
migrate stg diskpool_novlt lo=5 WAIT=YES
migrate stg diskpool lo=5 WAIT=YES
SERIAL
select SCHEDULE_NAME from ADMIN_SCHEDULES where
SCHEDULE_NAME='EXITIFEXIST'
IF (RC_OK) exit
PARALLEL
backup stg diskpool copypool maxpr=1 WAIT=YES
backup stg tapepool copypool maxpr=4 wait=YES
SERIAL
select SCHEDULE_NAME from ADMIN_SCHEDULES where
SCHEDULE_NAME='EXITIFEXIST'
IF (RC_OK) exit
PARALLEL
backup stg DBARCHPOOL copypool maxpr=4 wait=yes
SERIAL
-Josh-Daniel Davis
On 06.02.14 at 09:05 Timothy.Hughes AT OIT.STATE.NJ DOT US wrote:
Date: Tue, 14 Feb 2006 09:05:42 -0500
From: Timothy Hughes <Timothy.Hughes AT OIT.STATE.NJ DOT US>
Reply-To: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: AW: [ADSM-L] Automating server scripts
Hello all,
I set up a script to run every hour. with the following commands in the
script. When I run the script I receive a invalid parameter error for
the wait parameter.
/* This script queries the backuppool stgpool then stops migration on the
backuppool stgpool*/
run test_query_script wait=yes
run stop_disk_mig_script wait=yes
run test_query_script
The wait parameter is invalid can this be used in this sequence?
Thanks for any help!
ANR2020E RUN: Invalid parameter - WAIT.
ANR2020E RUN: Invalid parameter - WAIT.
Storage Device Estimated Pct Pct High Low Next
Pool Name Class Name Capacity Util Migr Mig Mig Storage
Pct Pct Pool
----------- ---------- ---------- ----- ----- ---- --- -----------
ARCHIVEPOOL DISK 63 G 0.0 0.0 90 70 H3592POOL
BACKUPPOOL DISK 1,014 G 67.6 67.6 70 40 H3592POOL
H3592POOL 3592CLASS 266,231 G 25.8 31.4 90 70
MIGPOOL DISK 84 G 12.8 12.8 75 50 H3592POOL
R3592POOL 3592RCLASS 270,464 G 25.4
ANR1462I RUN: Command script TEST_QUERY_SCRIPT completed successfully.
ANR1462I RUN: Command script GLOBAL_SCRIPT completed successfully.
PAC Brion Arnaud wrote:
Timothy,
You should build an admin schedule, which initiates something like "run Global_script",
and then in this "global_script", have all of your commands, like:
run test_query_script wait=yes
run stop_disk_migration wait=yes
run test_query_script
Hope this helped !
Cheers.
Arnaud
******************************************************************************
Panalpina Management Ltd., Basle, Switzerland,
CIT Department Viadukstrasse 42, P.O. Box 4002 Basel/CH
Phone: +41 (61) 226 11 11, FAX: +41 (61) 226 17 01
Direct: +41 (61) 226 19 78
e-mail: arnaud.brion AT panalpina DOT com
******************************************************************************
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Timothy Hughes
Sent: Thursday, 09 February, 2006 16:34
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: AW: [ADSM-L] Automating server scripts
Hello all,
I ran this via the admin schedule but it just seem to execute the first part of
the script (run test_query_script)?
do I need a second admin schedule to kick off the next script and so on? If so
how would the serial part of the command be incorporated into to that? I tried
wait=yes and the server log showed Invalid parameter - WAIT
thanks
CHECK_STGPOOL
Description TEST SCRIPT COMMAND
Command run test_query_script serial run stop_disk_migration serial run
test_query_script Priority 5 Start date 2006-02-08 Start time 08:13:00 Duration
15 Duration units MINUTES Period 1 Period units HOURS Day of Week ANY
Expiration - Active? YES Last Update Date/Time 2006-02-09 08:11:40.000000 Last
Update by (administrator) Managing profile - Schedule Style CLASSIC Month - Day
of Month - Week of Month -
Bill Kelly wrote:
I think that's correct; if you want the scripts to run in parallel, you'll need
multiple admin schedules. If you want the scripts to run serially, you could
kick off the first script via an admin schedule, then have that script run the
second script, and so on...
-Bill
Bill Kelly
Auburn University OIT
334-844-9917
Ramakrishna_Choudarapu AT ML DOT COM 02/08/06 9:04 AM >>>
Multiple scripts inside an admin schedule?
I believe each schedule can contain one cmd/script...
You may have to create multiple schedules, one for each server script.
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of Timothy Hughes
Sent: Wednesday, February 08, 2006 9:55 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] AW: [ADSM-L] Automating server scripts
Thanks to all!
I know about the admin scheduler already, I just wasn't sure if I
could put multiple scripts inside a admin schedule and run them
simultaneously say every 3 hours. I guess I would use multiple run
commands?
Thanks again!
Bill Kelly wrote:
Sorry...obviously, one should substitute
cmd="run script-name"
for
cmd="q proc"
but you all knew what I meant. :-)
To be more specific, set up the schedule with something a>long the lines of
this:
def sched queryproc t=a desc="query processes" cmd="q proc"
startt=13:59:00 dur=15 duru=m day=any per=1 peru=hours active=yes
Which will run the script every hour at (roughly) xx:59:00
-Bill
Joachim.Schaub AT ABRAXAS DOT CH 02/08/06 7:49 AM >>>
Simple:Build an admin scheduler with command run script ;-)
-----Ursprüngliche Nachricht-----
Von: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Im
Auftrag von Timothy Hughes
Gesendet: Mittwoch, 8. Februar 2006 14:48
An: ADSM-L AT VM.MARIST DOT EDU
Betreff: [ADSM-L] Automating server scripts
Hello,
Does anyone know of a way to Automate sever scripts to run on there own?? I
have scripts set up that I would like to run say every two hours. I know to run
a script you would use the run command but can that be automated?
TSM 5.3.2.1
AIX 5.3
Thanks for any help or suggestions
Regards
--------------------------------------------------------
If you are not an intended recipient of this e-mail, please notify the sender,
delete it and do not read, act upon, print, disclose, copy, retain or
redistribute it. Click here for important additional terms relating to this
e-mail. http://www.ml.com/email_terms/
--------------------------------------------------------
|
|
|