ADSM-L

Re: Move data for offsite volume

2005-09-17 15:23:18
Subject: Re: Move data for offsite volume
From: Fred Johanson <fred AT UCHICAGO DOT EDU>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Sat, 17 Sep 2005 14:22:52 -0500
What does it look like when you "q med 001360..."?  I have
seen a cart that's been checked in show up as "mountable not
in library".



---- Original message ----
>Date: Fri, 16 Sep 2005 22:05:48 -0400
>From: William Boyer <bjdboyer AT COMCAST DOT NET>
>Subject: Re: [ADSM-L] Move data for offsite volume
>To: ADSM-L AT VM.MARIST DOT EDU
>
>Did that, got the tee-shirt. This is one of the volumes,
it's in my library and access is read-only...
>
>tsm: TSM>q vol 001360 f=d
>
>                   Volume Name: 001360
>             Storage Pool Name: 3584CPPOOL
>             Device Class Name: 3584CLASS
>       Estimated Capacity (MB): 200,626.2
>       Scaled Capacity Applied:
>                      Pct Util: 8.7
>                 Volume Status: Full
>                        Access: Read-Only
>        Pct. Reclaimable Space: 91.6
>               Scratch Volume?: Yes
>               In Error State?: No
>      Number of Writable Sides: 1
>       Number of Times Mounted: 15
>             Write Pass Number: 1
>     Approx. Date Last Written: 07/24/2005 08:24:47
>        Approx. Date Last Read: 09/16/2005 21:44:52
>           Date Became Pending:
>        Number of Write Errors: 0
>         Number of Read Errors: 0
>               Volume Location: VAULT
>Volume is MVS Lanfree Capable : No
>Last Update by (administrator): WBOYER
>         Last Update Date/Time: 09/16/2005 10:53:56
>
>
>Bill Boyer
>"Some days you're the bug, some days you're the windshield" -
 ??
>
>-----Original Message-----
>From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]
On Behalf Of Stapleton, Mark
>Sent: Friday, September 16, 2005 9:48 PM
>To: ADSM-L AT VM.MARIST DOT EDU
>Subject: Re: Move data for offsite volume
>
>Because checking in a tape with CHECKIN that was checked out
with MOVE DRM still has "offsite" as its access. You need to
run
>
>  upd volume <volname> access=reado
>
>on every copy pool volume you check back in.
>
>--
>Mark Stapleton (stapleton AT berbee DOT com)
>IBM Certified Advanced Deployment Professional
>  Tivoli Storage Management Solutions 2005 IBM Certified
Advanced Technical Expert (CATE) AIX Office 262.521.5627
>
>
>
>>-----Original Message-----
>>From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]
On Behalf
>>Of William Boyer
>>Sent: Friday, September 16, 2005 8:27 PM
>>To: ADSM-L AT VM.MARIST DOT EDU
>>Subject: Move data for offsite volume
>>
>>TSM server 5.2.4.4 on AIX 5.2
>>
>>Due to a capacity "issue" with my libraries, some of my
onsite primary
>>pool tapes are not resident in my library. So to reclaim my
offsite
>>tapes, I've been checking in tapes that have 90% reclamable
space and
>>doing a move data on them. I've noticed a couple times
where the tape
>>is in the library, ACC=READO, but when I issue the MOVE
DATA command
>>against the tape, the tape is never mounted and the primary
pool tapes
>>(that are in the library) are used instead.
>>
>>The tapes were originally moved offsite with the MOVE
DRMEDIA command.
>>I brought them back, checked them into the library made
them ACC=READO.
>>I don't understand why TSM isn't doing a tape-to-tape copy??
>>
>>Bill Boyer
>>"Growing old is mandatory, growing up is optional" - ??
>>
Fred Johanson

<Prev in Thread] Current Thread [Next in Thread>