ADSM-L

Re: 3583 library

2005-09-15 09:03:05
Subject: Re: 3583 library
From: Maurice van 't Loo <tsm AT COMPARECOMPUTERS DOT NL>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 15 Sep 2005 15:02:38 +0200
Does the library know that you have a bulk i/o?
Maybe you have to check the settings....

----- Original Message -----
From: "Meadows, Andrew" <AMeadows AT BMI DOT COM>
To: <ADSM-L AT VM.MARIST DOT EDU>
Sent: Thursday, September 15, 2005 1:50 PM
Subject: Re: [ADSM-L] 3583 library


> That's just the problem. If I put tapes in the io door and do a
search=bulk labelsource=barcode and reply to the request nothing happens. No
error message nothing. If I manually pull them into empty slots in the
library and do a search=yes then I can label the tapes fine.....
>
> -
>
>
> Only use search=yes if the tapes are allready in the library....
> search=bulk searches the bulk-i/o....
>
> Regards,
> Maurice
>
> ----- Original Message -----
> From: "Scott, Mark William" <Mark.W.Scott AT UNISYSWEST.COM DOT AU>
> To: <ADSM-L AT VM.MARIST DOT EDU>
> Sent: Thursday, September 15, 2005 6:19 AM
> Subject: Re: [ADSM-L] 3583 library
>
>
> Hi Andrew
>    We have just upgraded our 3583 to a 3584 and the following is
> the syntax we would run for checking in new tapes to be labelled
>
>
> LABEL LIBVOLUME 3583LIB CHECKIN=SCRATCH SEARCH=BULK LABELSOURCE=BARCODE
>
> Then obviously or maybe not  q req and then reply to that number.
>
> Hope this helps
>
> Regards Mark
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf 
> Of
> Meadows, Andrew
> Sent: Thursday, 15 September 2005 12:08 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: 3583 library
>
> As a side note all firmware has been upgraded regularly in the past 2
> years. No help from firmware change..
>
> -----Original Message-----
> From: Meadows, Andrew <AMeadows AT BMI DOT com>
> To: 'ADSM-L AT VM.MARIST DOT EDU' <ADSM-L AT VM.MARIST DOT EDU>
> Sent: Wed Sep 14 21:31:21 2005
> Subject: 3583 library
>
> Config
> Tsm server version 5.3
> Windows 2003 server
> 3583 IBM library using tsm driver connected via SCSI
>
> Does anyone have a similar config? And if so do you have issues with
> label scratch search=bulk.  I am currently having to connect to the
> library web page and import the tapes, and do a label scratch
> search=yes. I have deleted and readded the library multiple times trying
> to get this to work. When it was installed initially I was told this is
> the way that tsm works with this library type...... Just wondering if
> anyone else has the same trouble and if I could get some help
> troubleshooting.
> Thanks in advance.
>
> ********************************************
> This message is intended only for the use of the Addressee and
> may contain information that is PRIVILEGED and CONFIDENTIAL.
>
> If you are not the intended recipient, you are hereby notified
> that any dissemination of this communication is strictly prohibited.
>
> If you have received this communication in error, please erase
> all copies of the message and its attachments and notify us
> immediately.
>
> Thank you.
> ********************************************
>

<Prev in Thread] Current Thread [Next in Thread>