ADSM-L

Re: 3583 library

2005-09-15 05:51:38
Subject: Re: 3583 library
From: Maurice van 't Loo <tsm AT COMPARECOMPUTERS DOT NL>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Thu, 15 Sep 2005 11:51:27 +0200
Only use search=yes if the tapes are allready in the library....
search=bulk searches the bulk-i/o....

Regards,
Maurice

----- Original Message -----
From: "Scott, Mark William" <Mark.W.Scott AT UNISYSWEST.COM DOT AU>
To: <ADSM-L AT VM.MARIST DOT EDU>
Sent: Thursday, September 15, 2005 6:19 AM
Subject: Re: [ADSM-L] 3583 library


Hi Andrew
   We have just upgraded our 3583 to a 3584 and the following is
the syntax we would run for checking in new tapes to be labelled


LABEL LIBVOLUME 3583LIB CHECKIN=SCRATCH SEARCH=BULK LABELSOURCE=BARCODE

Then obviously or maybe not  q req and then reply to that number.

Hope this helps

Regards Mark

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Meadows, Andrew
Sent: Thursday, 15 September 2005 12:08 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: 3583 library

As a side note all firmware has been upgraded regularly in the past 2
years. No help from firmware change..

-----Original Message-----
From: Meadows, Andrew <AMeadows AT BMI DOT com>
To: 'ADSM-L AT VM.MARIST DOT EDU' <ADSM-L AT VM.MARIST DOT EDU>
Sent: Wed Sep 14 21:31:21 2005
Subject: 3583 library

Config
Tsm server version 5.3
Windows 2003 server
3583 IBM library using tsm driver connected via SCSI

Does anyone have a similar config? And if so do you have issues with
label scratch search=bulk.  I am currently having to connect to the
library web page and import the tapes, and do a label scratch
search=yes. I have deleted and readded the library multiple times trying
to get this to work. When it was installed initially I was told this is
the way that tsm works with this library type...... Just wondering if
anyone else has the same trouble and if I could get some help
troubleshooting.
Thanks in advance.

********************************************
This message is intended only for the use of the Addressee and
may contain information that is PRIVILEGED and CONFIDENTIAL.

If you are not the intended recipient, you are hereby notified
that any dissemination of this communication is strictly prohibited.

If you have received this communication in error, please erase
all copies of the message and its attachments and notify us
immediately.

Thank you.
********************************************

<Prev in Thread] Current Thread [Next in Thread>