Re: Working SATA Disk Pool Configuration
2005-08-12 08:30:08
Yep 594GB Vols, @ 1-4 Vols per pool, so we have 594GB to 2TB TSM Pools.
Also I forgot to mention we are writing to 3592 Tape Drives connected to
2GBs SAN ports.
Regards,
Charles
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Ben Bullock
Sent: Thursday, August 11, 2005 4:30 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Working SATA Disk Pool Configuration
Thanks for the info, we have similar hardware and are thinking about
finally moving TSM to the SAN.
one question though on the last "TSM" section, did you mean to
say, "Defined 594~GB~ Disk Vols in TSM Storage Pool from 1-4 Vols per
pool". Just looking at the math, I'm not sure you could (or would want
to) make 594 individual volumes
Thanks,
Ben
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Hart, Charles
Sent: Thursday, August 11, 2005 3:10 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Working SATA Disk Pool Configuration
Someone had asked how we configured our Clarrion SATA Disk for TSM Disk
Pools... With this cfg we see 168GB Per Hour Data Transfer per stream
from Disk pool top Tape Pool
Clariion: CX700
Drives: 320 GB SATA
Raid Sets: Raid 3 (4+1) ((5 drives per set)) Number of Luns per Raid
Set: 2 Approx Lun Size: 594GB Stripe Size: 128K
AIX OS Cfg
Created 594GB Volumes with 64K Stripes
TSM
Defined 594 Disk Vols in TSM Storage Pool from 1-4 Vols per pool
|
|
|