Hi,
If you delete a library, all inventory info is lost. So, you have the
checkin all volume into your new libray. Because you don't want your
scratch volume to be checked in as private volume, you have to be
carefull in the order of checkin things in.
A) checkin libv * stat=Scratch checklabel=barcode search=library #
Private volumes will give a error;
B) checkin libv * stat=private blabla # Rest of the volumes will be
checked in as private
C) if you want, audit library.
Audit library will only remove volumes from the inventory if they aren't
found during the audit. It will never checkin volumes.
Regard,
Karel
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Alexander Lazarevich
Sent: donderdag 7 juli 2005 17:45
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: tsm tape path problems
Agreed, TSM is talking to the library. But the full libvol's are not
checked into it:
tsm: ITG-TSM>q libv
ANR2034E QUERY LIBVOLUME: No match found using this criteria.
ANS8001I Return code 11.
tsm: ITG-TSM>q vol
Volume Name Storage Device Estimated Pct
Volume
Pool Name Class Name Capacity Util
Status
(MB)
------------------------ ----------- ---------- ---------
-------------
E:\ITG-BACKUP-SPOOL-NEW ITG-BACKUP- DISK 550,000.0 96.1
On-Line
-SPOOL-NEW
G:\ITGDISKSPOOL.DSM ITG-BACKUP- DISK 200,000.0 0.0
On-Line
-SPOOL
H:\ITGMAILSPOOL.DSM ITG-MAIL-S- DISK 200,000.0 20.7
On-Line
POOL
ITG002L2 LTO2POOL LTOCLASS1 272,663.2 37.7 Full
ITG004L2 LTO2POOL LTOCLASS1 235,948.8 50.9 Full
ITG005L2 LTO2POOL LTOCLASS1 217,624.5 57.9 Full
etc....
So I gather I need to checkin the libvol's into the "new" library,
right?
But I worried about that, because I've only ever used checkin libvol to
add scratch tapes, and these tapes are NOT scratch. Can you verify that
I have the checkin command right:
checkin libvol lb6.0.0.5 search=yes status=scratch checklabel=yes
I'm only worried about the command because of the status=scratch. I
can't have any of my volumes with data on them marked as scratch or else
I'm hosed. Do I have the command right?
Thanks Bill, I do appreciate it,
Alex
On Thu, 7 Jul 2005, William Boyer wrote:
If it wasn't "talking" to the library, then you would get errors. And
audit compare TSM's LIBV inventory with the library inventory.
If the library inventory is up to date, then the library does not need
to rescan the slots, but just returns the inventory to TSM.
Plus you would not be able to define the drives with the ELEMENT= if
the library wasn't "talking" correctly. The ELEMENT= number is
verified with the library. To see what elements and such you can issue
the SHOW SLOTS LB6.0.0.5 command. Another useful command is SHOW LIBRARY
LB6.0.0.5.
Have you tried to mount a tape and write to it? Or maybe even just a
checkin?
Bill Boyer
"Some days you're the bug, some days you're the windshield" - ??
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of Alexander Lazarevich
Sent: Thursday, July 07, 2005 10:49 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: tsm tape path problems
William, et all,
Thanks for your great responses, I think I'm closer to getting it
working, but I still need a little more help.
I understand what you are saying about updating the paths, but the
problem is I already removed the old paths and devices (xxx.0.0.3),
and created the new devices and paths (xxx.0.0.5). So I think doing an
update path is out of the question. I'm stuck trying to associate the
new devices with the old server, which should be possible right?
So, I've removed all devices and paths, rebooted, then added all
devices and paths (for the xxx.0.0.5 devices), rebooted again, and now
TSM seems to think the devies and paths are correct:
tsm: ITG-TSM>q library
Library Name: LB6.0.0.5
Library Type: SCSI
ACS Id:
Private Category:
Scratch Category:
External Manager:
RSM Media Type:
Shared: No
LanFree:
ObeyMountRetention:
tsm: ITG-TSM>q drive
Library Name Drive Name Device Type On-Line
------------ ------------ ----------- -------------------
LB6.0.0.5 MT1.0.0.5 LTO Yes
LB6.0.0.5 MT2.0.0.5 LTO Yes
tsm: ITG-TSM>q path
Source Name Source Type Destination Destination
On-Line
Name Type
----------- ----------- ----------- -----------
-------
ITG-TSM SERVER LB6.0.0.5 LIBRARY Yes
ITG-TSM SERVER MT1.0.0.5 DRIVE Yes
ITG-TSM SERVER MT2.0.0.5 DRIVE Yes
But something is still not right, because when I run an audit of the
"new"
library, the process completes, but it does nothing to the library,
the library doesn't move in inch, it is not talking to the library
correctly:
ANR2017I Administrator DUDE issued command: AUDIT LIBRARY lb6.0.0.5
checklabel=yes ANR0984I Process 5 for AUDIT LIBRARY started in the
BACKGROUND at 09:41:03.
ANR8457I AUDIT LIBRARY: Operation for library LB6.0.0.5 started as
process 5.
ANR8461I AUDIT LIBRARY process for library LB6.0.0.5 completed
successfully.
ANR0985I Process 5 for AUDIT LIBRARY running in the BACKGROUND
completed with completion state SUCCESS at 09:41:03.
I'm wondering if my device class is not correct in some way?:
tsm: ITG-TSM>q dev
Device Device Storage Device Format
Est/MaxMount
Class Access Pool Type
CapacityLimit
Name Strategy Count (MB)
--------- ---------- ------- --------- ------
--------------
DISK Random 3
LTOCLASS1 Sequential 1 LTO DRIVE
DRIVES
Any other ideas?
Thanks!
Alex
On Thu, 7 Jul 2005, William Boyer wrote:
One thing I have found with Windows is after any type of hardware
change, whether it is a replacement or just firmware updates, Windows
seems to not recognize it as the same device, and creates new ones
for this same (upgraded) hardware. If you just give the TSM server a
few minutes to time out on trying to initialize the library, then
you can update the library path to the new device= and then update the
drive paths to the new device=.
I've started stopping TSM, removing the library/drives from Device
manager in Windows, doing the upgrade/replace and rebooting. I've
found that Windows assigns the same devices. Then I just restart
TSM and verify that all is well.
I don't know if persistent mappings with the fibre adapter (if you
are running fibre drives) would resolve this issue...
Bill Boyer
"Some days you're the bug, some days you're the windshield" - ??
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of Alexander Lazarevich
Sent: Wednesday, July 06, 2005 11:21 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: tsm tape path problems
TSM 5.1.9.0 on win2K server. Overland Neo 4100 with 2 LTO-2 drives.
I've got a bad problem, and I'm stuck trying to read the manual for
clues but I'm having trouble finding what I need to know and I could
really use a point in the right direction.
TSM has been running just fine since I set it up more than two years
ago.
I used the TSM wizard to set everything up, and it was quite easy.
Last week we had an LTO-2 drive failure, some bad cables, and an
intermittent library controller card. All those hardware issues
have been fixed.
But somewhere in the mess of fixing all the hardware issues, the TSM
/windows drivers for the devices got confused, and TSM is now
recognizing the library and the drives as different device names.
Whereas TSM used to call the devices: lb6.0.0.3 (library),
mt1.0.0.3 (drive 1), and mt2.0.0.3 (drive 2); TSM is now calling
those devices lb6.0.0.5, mt1.0.0.5, and mt2.0.0.5.
I've tried everything I know of to fix the path between the server
and the "old" devices (lb6.0.0.3), but nothing I tried worked.
So, I then set out to try and define new path's for the "new" devices
(lb6.0.0.5). I've done the following:
- Define the new library and drives, giving them the proper names
and element ID's.
- Update the server's LTO Device Class, giving it the new library
name
lb6.0.0.5.
- Add the new path's for the drives and the library:
tsm: ITG-TSM>q path
Source Name Source Type Destination Destination
On-Line
Name Type
----------- ----------- ----------- -----------
-------
ITG-TSM SERVER LB6.0.0.5 LIBRARY Yes
ITG-TSM SERVER MT1.0.0.5 DRIVE Yes
ITG-TSM SERVER MT2.0.0.5 DRIVE Yes
But then I try to run an audit of the new library, and I get nothing:
ANR2017I Administrator ALAZAREV issued command: AUDIT LIBRARY
lb6.0.0.5 ANR0984I Process 5 for AUDIT LIBRARY started in the
BACKGROUND at 21:42:02.
ANR8457I AUDIT LIBRARY: Operation for library LB6.0.0.5 started as
process 5.
ANR8461I AUDIT LIBRARY process for library LB6.0.0.5 completed
successfully.
ANR0985I Process 5 for AUDIT LIBRARY running in the BACKGROUND
completed with completion state SUCCESS at 21:42:02.
The audit did nothing, as it starts and completes within a second.
The library didn't move an inch.
Obviously, I'm not setting up the paths properly, or the devices
classes, or something. What I find odd is that when I run the Device
Configuration Wizard, TSM does not find any devices. That is
different from when I first installed TSM, when it found all devices
automatically for me.
I'm going to read Chapter 4 of the admin guide tonight when I go
home, but I've already looked at it, and I can't find the information
I need described in a clear manner. Any help anyone could provide,
even just pointing me to some good documentation, I would appreciate
it.
Sorry to be a pest, but I'm in trouble, as our backups are down and I
need a little help getting it back up.
Thanks in advance,
Alex