This would be true, Daniel, if Pawel were using AIX on his TSM server. However, 
he commented that he was using Windows...

--
Mark Stapleton (stapleton AT berbee DOT com)
IBM Certified Advanced Deployment Professional
Tivoli Storage Management Solutions 2005
Office 262.521.5627  

>-----Original Message-----
>From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On 
>Behalf Of Daniel Sparrman
>Sent: Monday, May 09, 2005 6:32 AM
>To: ADSM-L AT VM.MARIST DOT EDU
>Subject: Re: problems with medium changer driver in 3583
>
>You will need to install the IBM Atape driver, which you can 
>find here: 
>ftp://ftp.software.ibm.com/storage/devdrvr/.
>
>You cannot use the TSM device driver for IBM equipment.
>
>Best Regards
>
>Daniel Sparrman
>-----------------------------------
>Daniel Sparrman
>Exist i Stockholm AB
>Propellervägen 6B
>183 62 TÄBY
>Växel: 08 - 754 98 00
>Mobil: 070 - 399 27 51
>
>
>
>Otto Schakenbos <oschakenbos AT TELEFLEX DOT COM> 
>Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>2005-05-09 13:27
>Please respond to
>"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
>
>
>To
>ADSM-L AT VM.MARIST DOT EDU
>cc
>
>Subject
>Re: problems with medium changer driver in 3583
>
>
>
>
>
>
>not sure about windows but in linux/unix there is the tsmscsi driver
>that you use for all library's except IBM library's. If you have a ibm
>library you need to use a special driver that only works with ibm
>library's. (IBMtape or something)
>
>maybe you are using the generic driver instead of the ibm driver?
>
>regards
>
>Otto Schakenbos
>System Administrator
>
>TEL: +49-7151/502 8468
>FAX: +49-7151/502 8489
>MOBILE: +49-172/7102715
>E-MAIL: oschakenbos AT teleflex DOT com
>
>Teleflex Holding GmbH
>Corporate IT Europe
>Fronackerstrasse 33-35
>71332 Waiblingen
>GERMANY
>
>
>
>
>Pawel Jobkiewicz wrote:
>
>>Hi!
>>
>>I have server 2003 SP1 with TSM 5.3.1.1 and library IBM Ultrium 3583 
>connected to this server via FC. I've installed drivers to the tapes 
>without any problem, but I can't install correctly meduim 
>changer. I've 
>installed "TSM drivers for medium changer - tsmscsi.sys". But 
>in Windows 
>Device Manger next to this device there is an exlamation mark and in 
>propertis there is note that "windows can't load all drivers. 
>code 31" My 
>TSM see only tape drivers. I can't define path to the library. I don't 
>know what's wrong, I did everything what is said in user guide.
>>What's the problem? Can anybody help me?
>>Thanks
>>Pawel
>>
>>
>