ADSM-L

Re: WinPE Image backup problem

2005-02-25 22:59:41
Subject: Re: WinPE Image backup problem
From: Iain Barnetson <Iain.Barnetson AT HALLIBURTON DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Sat, 26 Feb 2005 03:59:43 -0000
Andy,
Sorry but I can't see in my previous email where I said that it was your
"policy to attribute our own names to the work of others", maybe you
could point that out to me?

Meantime, have a look at version 1 of the document and see who it was
written by, and also what it says about field guides being written by,
in some cases, "customers and business partners".  

So no one, neither me nor IBM are saying that you guys write all the
field guides, not say that you CLAIM to write ALL the field guides :)


I can see that I'll have to start asking which versions of documents
people are referencing, and have to start stating which I'm referencing.
If I / We had, this whole thread would never have happened.

Iain



 
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of
Andrew Raibeck
Sent: 25 February 2005 21:08
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: [ADSM-L] WinPE Image backup problem

Iain,

To which document do you refer? I am operating under the impression that
we are talking about the field guide "Tivoli Storage Manager Recovery
Techniques Using Windows Preinstallation Environment (Windows PE)"
available at http://www-1.ibm.com/support/docview.wss?uid=swg27005204.

It is not our policy to attribute our own names to the work of others. I
can assure you that the document was authored by the folks at IBM who
are
credited on the document's title page.

The email address I found for sending feedback re: field guides is
Tivoli_eSupport_Feedback AT us.ibm DOT com. I've sent off a test email to it
(hasn't bounced yet), and from my own lookup, it appears valid.

Again, specifics about the troubles you are having would be helpful,
else
there's not much I or anyone else can do.

Regards,

Andy

Andy Raibeck
IBM Software Group
Tivoli Storage Manager Client Development
Internal Notes e-mail: Andrew Raibeck/Tucson/IBM@IBMUS
Internet e-mail: storman AT us.ibm DOT com

The only dumb question is the one that goes unasked.
The command line is your friend.
"Good enough" is the enemy of excellence.

"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU> wrote on 2005-02-25
13:32:13:

> I've backed up & restored some servers sucessfully using WinPE - but
> NOT from following the published IBM TSM procedure. The procedure
> wasn't written by IBM just published by them. It's a bad sign that
> they couldn't even manage to put an email address for reporting
> feedback that actually works, emails bounce back when sent to it.
> Iain
>
>
>
> -----Original Message-----
> From: ADSM: Dist Stor Manager on behalf of Egon Blouder
> Sent: Fri 25/02/2005 20:24
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: [ADSM-L] WinPE Image backup problem
>
> Hi,
>
> I've successfully restored a box using a WinPE/BartPE.
> Regarding the guide itself there are some questions I have. I'll
> open a separte thread.
>
>
> Regards
> ..--
>
>
> Iain Barnetson <Iain.Barnetson AT HALLIBURTON DOT COM> wrote:
>
> >Andy, Kyle
> >I can tell you that the procedure as it is now DOES NOT work. I
> have also alerted IBM to this FACT.
> >Iain
> >
> >
> >-----Original Message-----
> >From: ADSM: Dist Stor Manager on behalf of Andrew Raibeck
> >Sent: Fri 25/02/2005 18:50
> >To: ADSM-L AT VM.MARIST DOT EDU
> >Subject: Re: [ADSM-L] WinPE Image backup problem
> >
> >Kyle, the procedure should work. The authors of the document work in
TSM
> >development and test, and have actually tested them before
publication.
> >
> >It would help to see, in excruciating detail, exactly what you are
doing,
> >include actual copy & paste from the console (*complete*, everything)
of
> >what you are doing with TSM, along with any error log info that might
be
> >written.
> >
> >Make sure that the C: drive is not being used by anything else (i.e.
that
> >you are not CD'd into it from an OS prompt, for example).
> >
> >Regards,
> >
> >Andy
> >
> >Andy Raibeck
> >IBM Software Group
> >Tivoli Storage Manager Client Development
> >Internal Notes e-mail: Andrew Raibeck/Tucson/IBM@IBMUS
> >Internet e-mail: storman AT us.ibm DOT com
> >
> >The only dumb question is the one that goes unasked.
> >The command line is your friend.
> >"Good enough" is the enemy of excellence.
> >
> >"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU> wrote on 2005-02-25
> >11:19:25:
> >
> >> Well I tried using the offline and online method with Windows 2000.
> >> I get "can't lock volume" for the backup with offline.  I also get
> >> "can't lock volume" for the offline restore after a good backup.
Is
> >> that what you got Luc?
> >>
> >> Kyle
> >>
> >> TSM_User <tsm_user AT YAHOO DOT COM> wrote:
> >> Luc, I will try the online image but the thing I wanted to do was
> >> create an offline image of a Win2K3 server.
> >>
> >> Oh great one! (Andy R.), can you find out if the doc is wrong in
the
> >> fact that you can't use it to create an offline backup via WinPE.
If
> >> you can't then you can't I just want to know if I should do more
> >> research to try and get this to work.
> >>
> >> Kyle
> >>
> >> Luc Beaudoin wrote:
> >> Hi,
> >> I have a all opened with IBM for an issue with WINPE.
> >>
> >> But my problem is not the backup image part .. it's the restore
image...
> >>
> >> For the backup they told me to use the ONLINE image backup
procedure
in
> >> the document.
> >>
> >> Just follow thew procedure for the ONLINE BACKUP and it should work
....
> >> Let me know if you are able to make the RESTORE IMAGE works ..
> >>
> >> If U have any questions , call me or e-mail me ....
> >>
> >> Luc Beaudoin
> >> Network Administrator/TSM/SAN
> >> Hopital General Juif S.M.B.D.
> >> Tel: (514) 340-8222 ext:8254
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> TSM_User
> >> Sent by: "ADSM: Dist Stor Manager"
> >> 2005-02-24 08:51 PM
> >> Please respond to "ADSM: Dist Stor Manager"
> >>
> >>
> >> To: ADSM-L AT VM.MARIST DOT EDU
> >> cc:
> >> Subject: WinPE Image backup problem
> >>
> >>
> >> I have my test lab all setup to run through the steps in the
"Tivoli
> >> Storage Manager Recovery Techniques Using Windows Preinstallation
> >> Environment (Windows PE)" guide. I'm using the TSM V5.3 client and
my
> >> WinPE CD is WinXP SP2.
> >>
> >> I issue the command "dsmc.exe backup image c: -imagetype=static
> >> -asrmode=yes".
> >> Communication with the TSM works and I enter the ID and password.
Then
> >> the backup fails with error message ANS1287E Volume could not be
locked.
> >I
> >> received no other errors. I get objects inspected 1 objects backed
up
0.
> >>
> >> I made sure to run diskpart to verify that there was a C: and that
it
> >was
> >> the correct volume I want to backup and it was.
> >>
> >> Just to see what would happen I ran "dsmc.exe i c:" and it looks
like
it
> >> is running that backup OK.
> >>
> >> Has anyone else tried the WinPE Image backup and gotten it to work?
Has
> >> anyone run into this problem?
> >>
> >>
> >>
> >>
> >>
> >> ---------------------------------
> >> Do you Yahoo!?
> >> Yahoo! Mail - You care about security. So do we.
> >>
> >>
> >> ---------------------------------
> >> Do you Yahoo!?
> >> Yahoo! Mail - Easier than ever with enhanced search. Learn more.
> >>
> >>
> >> ---------------------------------
> >> Do you Yahoo!?
> >>  Yahoo! Mail - Helps protect you from nasty viruses.
> >
>
> __________________________________________________________________
> Switch to Netscape Internet Service.
> As low as $9.95 a month -- Sign up today at
http://isp.netscape.com/register
>
> Netscape. Just the Net You Need.
>
> New! Netscape Toolbar for Internet Explorer
> Search from anywhere on the Web and block those annoying pop-ups.
> Download now at http://channels.netscape.com/ns/search/install.jsp

<Prev in Thread] Current Thread [Next in Thread>