Re: 3584 Tape Drive Usage Information

Why not try the TAPE MOUNT rows from the SUMMARY table? Gives you the
start/end time of each tape mount, the drive it was moutned on and the tape
volume name. This will probably include the mount retenetion time for the
devclass.

select * from summary where activity='TAPE MOUNT'

Bill Boyer
"I saw screens of green, red messages too, then came blue, shubidu
And i think to myself, what a wonderful world
" - ??


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
Akash Jain
Sent: Thursday, February 17, 2005 4:25 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: 3584 Tape Drive Usage Information


Will the same script work on solaris also?


Regards
Akash Jain



-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
Hooft, Jeroen
Sent: Thursday, 17 February 2005 2:39 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: 3584 Tape Drive Usage Information

See attached the script we use for this purpose.
starts from cron every 10 minutes.

R Jeroen


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
Sung Y Lee
Sent: woensdag 16 februari 2005 22:30
To: ADSM-L AT VM.MARIST DOT EDU
Subject: 3584 Tape Drive Usage Information


Howdy folks,

In 3584 Library with LTO drives, is there a way to find out tape drives
utilization information? How long the tape has been used(not idle state)
per drive?
Not from TSM, but more like from OS level.  This is for AIX.  But if you
have some sort of  select command  from TSM that would be wonderful also.
I am looking into creating kinda of report that displays Drive#, Used
Duration,  Period.  Thank you.

Sung Y. Lee