Hallo Joerg!
Your tip/hint was absolutely right.
I followed your instructions --> and all went OK
Thanks a lot for your help
Michael Malitz
e-mail: michael.malitz AT mm-it DOT at
-----Ursprüngliche Nachricht-----
Von: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Im Auftrag von
Joerg Pohlmann
Gesendet: Samstag, 05. Februar 2005 21:48
An: ADSM-L AT VM.MARIST DOT EDU
Betreff: Re: AW: TSM 5.3 and ISC install
Michael, make sure that the amount of memory the virtual machine "sees"
(as RAM) is 1GB. Also, I found that on some installs, the process wants to
go to SUN's java site and download/install bits and pieces of java, but
this varies with what's installed on your W2K machine. It just means that
you will need to let the install process access the internet.
Joerg Pohlmann
604-535-0452
Michael Malitz <michael.malitz AT MM-IT DOT AT>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
2005-02-05 11:17
Please respond to
"ADSM: Dist Stor Manager"
To
ADSM-L AT VM.MARIST DOT EDU
cc
Subject
AW: TSM 5.3 and ISC install
Hi all,
I?m also struggling with the new ISC and can not get over 66 %!!.
I'm using Windows XP Host with VMWare and installed W2K Advanced Server
SP4.
My assigned physical memory to that W2K machine is 700 MB . During install
a
maximum of around 520 MB is used by ISCinstall processes.
I increased the virtual Memory min 500 max 2000 MB and have 2,3 GB free
disk space
When I reach 66 % I get an error:
Help is very much appreciated ? thanks and rgds Mikel
Contents of ISCRuntimeInstallProgress.properties
+++++++++++++++++++++++++++++++++++++++++
#Sat Feb 05 22:33:17 CET 2005
ISC_FAILURE_MESSAGE=CheckDeployPageFail
status=FAILED
timestamp=Sat Feb 05 22\:33\:17 CET 2005
+++++++++++++++++++++++++++++++++++++++++++ end of log
Contents of - the last entries of ISCRuntimeInstall.log
(Feb 5, 2005 10:33:17 PM), Setup.product.install,
com.ibm.pvc.we.care.ismp.RemovePasswordsAction, msg2, Password replacement
complete
(Feb 5, 2005 10:33:17 PM), Setup.product.install,
com.ibm.pvc.we.care.ismp.RemovePasswordsAction, msg2,
RemovePasswordsAction
exit.
(Feb 5, 2005 10:33:17 PM), Setup.product.install,
com.ibm.pvc.we.care.ismp.FailAndExitAction, wrn, CheckDeployPageFail
(Feb 5, 2005 10:33:17 PM), Setup.product.install,
com.ibm.pvc.we.care.ismp.FailAndExitAction, wrn,
(Feb 5, 2005 10:33:17 PM), Setup.product.install,
com.ibm.pvc.we.care.ismp.FailAndExitAction, msg2,
status=FAILED,timestamp=Sat Feb 05 22:33:17 CET 2005,progress=(unchanged)
+++++++++++++++++++++++++++++++++++++++++++ end of log
Thanks again
Michael Malitz
e-mail: michael.malitz AT mm-it DOT at
-----Ursprüngliche Nachricht-----
Von: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] Im Auftrag von
Steve Harris
Gesendet: Montag, 31. Jänner 2005 03:04
An: ADSM-L AT VM.MARIST DOT EDU
Betreff: Re: TSM 5.3 and ISC install
Hi all
For what its worth, I installed all the ISC stuff without incident on a
newly installed (just TSM and MSSQL) generic brand win20003 server with
2GB
of memory.
The only issue that I had was that to begin with I was attempting to
install
from a remotely mounted file specified as UNC ie
\\remoteservername\drive\etc
When I mapped the drive and tried again everything went swimmingly.
Now learning to use it is another matter, but the install part wasn't too
bad for me.
Regards
Steve.
Steve Harris
TSM Admin
Queensland Health, Brisbane Australia.
>>> zforray AT VCU DOT EDU 29/01/2005 1:24:48 >>>
Well, I decided to try it again, trying this suggestion.
I increased my virtual-storage to 2.2GB (it was at 700MB + 512MB real).
Same results.
I fired up Window Task Manager and watched the install the whole time.
Memory usage never went above 425MB.
The install gets to 10% and sits there for around 10-minutes. Then jumps
to 15%....sits there a while and then BOOM - "Install Failed - Uninstall
Failed".
Oh well.....time to call for support !
David Wellington <David_Wellington AT UK.IBM DOT COM>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
01/28/2005 03:11 AM
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To
ADSM-L AT VM.MARIST DOT EDU
cc
Subject
Re: TSM 5.3 and ISC install - won't
Hi,
I've just spent 3 weeks or so trying to install ISC on a virtual machine
and have experience many problems. The install would fail at the 15% mark
everytime.
Each time the install failed I looked in the logs that it told me too, and
like you, it was full of rubbish. At no stage was there ever an error
message that told me what the problem was.
In the end, after trying many different things, including upgrading Java,
I
increased the memory allocation to the virtual machine and it installed up
to 66% complete before failing. I then increased the memory again, and
after yet another 4 hours, the install finally completed.
In the end, I had some 2Gb of memory allocated to the virtual machine.
Hopefully, this information maybe of some help.
Regards.
David Wellington
Zoltan
Forray/AC/VCU
<zforray AT VCU DOT EDU>
To
Sent by: "ADSM: ADSM-L AT VM.MARIST DOT EDU
Dist Stor cc
Manager"
<[email protected] Subject
.EDU> TSM 5.3 and ISC install - won't
27/01/2005 19:24
Please respond to
"ADSM: Dist Stor
Manager"
Speaking of the "topic of the day", I thought I would install the ISC,
just to see what the fuss is all about (I use TSMManager for pretty much
everything TSM wise). Especially since I just upgraded my test TSM
server.
I have now tried *FOUR* times to install this wonderful product, only to
fail each time.
After wandering through the /Program Files/IBM/ISC/log.txt file (per the
error message) and then following the bouncing-ball to the
*:\...\Temp\ISCRuntimeInstall.log file (filled with Java jibberish), I
find the error message:
WizardException: (error code = 200; message="C:\Program
Files\IBM\ISC\PortalServer\config\wpconfig.properties (The system cannot
find the path specified)"; exception = [ServiceException: (error code =
200; message = "C:\Program
Files\IBM\ISC\PortalServer\config\wpconfig.properties (The system cannot
find the path specified)"; severity = 0; exception =
[java.io.FileNotFoundException: C:\Program
Files\IBM\ISC\PortalServer\config\wpconfig.properties (The system cannot
find the path specified)])])
at
com.installshield.wizardx.ascii.ModifyFile.writeFile(ModifyFile.java:280)
at
com.installshield.wizardx.actions.AsciiFileUpdateWizardAction.execute(AsciiF
ileUpdateWizardAction.java:171)
at
com.installshield.wizard.StandardWizardListener.execute(StandardWizardListen
er.java:123)
at
com.installshield.wizard.StandardWizardListener.currentBeanChanged(StandardW
izardListener.java:106)
at com.installshield.wizard.Wizard$RunThread.run(Wizard.java:1564)
I installed the latest JAVA (after the first two failed attempts).
I have completely deleted the ISC and TEMP directories before each attempt
(after the first failure, the second attempt told me that ISC was already
installed, when it had not finished).
I have disabled all firewalls, blockers, etc.
The system is W2K. There is 8GB free disk space and 1GB of RAM !
So, can someone tell me how to resolve this ?
****************************************************************************
*******
This email, including any attachments sent with it, is confidential and
for
the sole use of the intended recipient(s). This confidentiality is not
waived or lost, if you receive it and you are not the intended
recipient(s),
or if it is transmitted/received in error.
Any unauthorised use, alteration, disclosure, distribution or review of
this
email is prohibited. It may be subject to a statutory duty of
confidentiality if it relates to health service matters.
If you are not the intended recipient(s), or if you have received this
email
in error, you are asked to immediately notify the sender by telephone or
by
return email. You should also delete this email and destroy any hard
copies
produced.
****************************************************************************
*******
|
