We are just going to reconfig the DR TSM server to inheret the name /IP
address of the production server
for DR test purposes.

>>> bbullock AT MICRON DOT COM 02/11/2005 11:55:20 AM >>>
        Those are the 2 filesets you need. The other thing you may have
to do is configure the library manager so that it will accept the
TCP/IP
connections from your DR host.

        It's been a while since I've done it, but it's in the menu
under
"LAN host connections" or something like that.

Ben


-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf
Of
Lawrence Clark
Sent: Friday, February 11, 2005 9:37 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: 3494 tape library on AIX

 We are setting up a DR machine. While we have TSM coming up after a
DB
restore, we still need to test connecting the 3494 tape library on the
DR machine. Looking through the software inventory on the production
machine, these seem to be the only related software packages for the
tape libbrary and cartridge drivers. We have network connections to
the
library, no scsi connections.

Is any other software required for the tape library?

Atape.driver               9.0.7.0    C     F    IBM AIX Enhanced Tape
and
                                                   Medium Changer
Device
Driver

atldd.driver               5.5.1.0    C     F    IBM Automated Tape
Library
                                                   Device Driver


Larry Clark