Thanks Dave,

I Thought you needed to be at ML2 for Aix 5.2? to install TSM 5.3
although I guess it doesn't matter because we are at ML4  so we should
be ok for TSM 5.3 and the Admin Center.

Dave Canan wrote:

>     I agree, this is confusing. Let me see if I can list the requirements 
> here:
>
>          AIX 5.2, 32-bit  - devices.common.IBM.fc.hba-api  5.2.0.30 or higher
>          AIX 5.2 64-bit   -  devices.common.IBM.fc.hba-api > 5.2.0.30 (ML4
> or higher)
>
>          AIX 5.3 32-bit  -  devices.common.IBM.fc.hba-api 5.3.0.0 (base level)
>          AIX 5.3 64-bit  -  devices.common.IBM.fc.hba-api 5.3.0.10
>
>     Also, in answer to your question regarding AIX 5.2 level for TSM
> 5.3,  you must be at release level 52f, which is the same as maintenance
> level 3.
>
> At 01:06 PM 1/28/2005 -0500, you wrote:
> >Does anyone know the correct fileset required to use San Discovery for
> >TSM V5.3?
> >(devices.common.IBM.fc.hba-api required)  for AIX 5.2.
> >I read in the TSM supported HBAs for San Device maping
> >technote that it's 5.2.0.50.
> >
> >But I read in the ITSM,server & Storage Agent v5.3.0 readme
> >where it said later than 5.2.0.30 for 64-bit. We are at 5.2.0.40.
> >
> >I also understand that 5.2.0.30 for 64-bit. Has the error.
> >Does anyone know where else I can look on the IBM site
> >to check for any errors on filesets?
> >
> >Also, Just to be sure what maintenance level does TSM 5.3
> >require for Aix 5.2. I believe it's ML2 we are at ML 4 so
> >I assume we are ok and no apar is needed.
> >
> >Thanks for any help in advance
> >
> >Config
> >
> >TSM 5.2.3.1 & 5.2.3.5
> >AIX 5.2 Maintenance level 4
> >pseries 670
>
> Dave Canan
> TSM Performance
> IBM Advanced Technical Support
> ddcanan AT us.ibm DOT com