Re: TSM 5.2, Solaris 8 w/ STK L700 9940B drive
2005-01-11 02:38:22
Thomas,
it is my understanding that TSM device driver does not support FC
connection to devices. You have to have SCSI connection to drives.
In your case it means, that you have to have FC HBA, which present SCSI
interface to host system (Solaris).
In your mt.conf file you have to use fo "parent" parameter value SCSI.
But I am not sure if this is true also in 5.2.
Hope this helps
Regards
Ing. Jozef Zatko
Login a.s.
Dlha 2, Stupava
tel.: (421) (2) 60252618
"Schulz, Thomas (K-GOI-1/2)" <Thomas5.Schulz AT VOLKSWAGEN DOT DE>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
01/10/2005 05:19 PM
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To
ADSM-L AT VM.MARIST DOT EDU
cc
Subject
TSM 5.2, Solaris 8 w/ STK L700 9940B drive
Hi Guys,
Currently I'm having problem configuring TSM mt driver on Solaris 8 with
STK
9940B tape drive. I tried many different mt.conf configuration but I still
got the following error:
# add_drv -v /usr/kernel/drv/mt
exit status = 0
devfsadm: driver failed to attach: mt
exit status = 11
Warning: Driver (mt) successfully added to system but failed to attach
Driver (mt) installed.
Following is the configuration that I have been tried:
name="mt" parent="fp" target="0" lun="0" fc-port-wwn="500104f101782200"
name="mt" parent="pseudo" instance=16383
root@xxxxxxxxxxx # luxadm display /dev/rmt/6n
DEVICE PROPERTIES for tape: /dev/rmt/6n
Vendor: STK
Product ID: 9840
Revision: 0198
Serial Num: 000992201053
Device Type: Tape device
Path(s):
/dev/rmt/6n
/devices/pci@1f,2000/SUNW,qlc@1,1/fp@0,0/st@w500104f101782200,5:n
LUN path port WWN: 500104f101782200
Host controller port WWN: 210100e08b36c0fc
Path status: Not Ready
========================= IO Cards =========================
Bus Freq
Brd Type MHz Slot Name Model
--- ---- ---- ---- --------------------------------
----------------------
SYS PCI 33 4 SUNW,ifp-pciclass,0000
SYS PCI 66 5 SUNW,qlc-pciclass,0c04 0x10a
SYS PCI 33 7 scsi-pciclass,001000 Symbios,53C875
No failures found in System
===========================
root@xxxxxxxxxxx # cfgadm -al
Ap_Id Type Receptacle Occupant
Condition
c6::500104f101782200 tape connected configured
unknown
c6::500104f101783200 tape connected configured
unknown
How can I fix this problem? Please help!
Thanks, Thomas
ForwardSourceID:NT0005576E
|
|
|