Hi all!

Or you can use "export server/import server". It takes a while longer but can 
seem a bit safer.
 
Kind Regards/Med vänlig hälsning

Fredrik Karlsson

System Engineer / Backup and Storage

AddPro AB
Lona Knapes Gata 5A
S-421 32  VÄSTRA FRÖLUNDA

Phone: (+46) 31 890 400
Direct: (+46) 31 720 0411
Fax:    (+46) 31 890 429

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU] On Behalf Of 
Daniel Sparrman
Sent: Friday, November 26, 2004 1:51 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: New hardware, new TSM version

Hi Lars-Erik

Easiest way would be to back up the databases on both machines and then 
restore the databases back to the new hardware.

The LTO-1 tapes should have no problems operating with the new LTO-2 
drives. However, you will not recieve the larger capacity of the 
LTO-2(200/400GB). They will still operate with their native 
capacity(100/200GB). You will however get higher throughput using your new 
LTO-2 drives with your old LTO-1 tapes. I believe the throughputrate is 
somewhere at 25MB/s.

When you have your new hardware up and running (new servers and new tape 
drives) you can migrate the information from the old LTO-1 tapes to new 
LTO-2 tapes to utilize the increase in capacity.

Be aware that you will need to do an dsmserv upgradedb after you have 
restored your databases.

If you have any further questions, plz email me directly.

Best Regards

Daniel Sparrman
-----------------------------------
Daniel Sparrman
Chef Utveckling & Drift
Exist i Stockholm AB
Propellervägen 6B
183 62 TÄBY
Växel: 08 - 754 98 00
Mobil: 070 - 399 27 51



Lars-Erik Öhman <larsa.ohman AT CARNEGIE DOT SE> 
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
2004-11-26 13:35
Please respond to
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>


To
ADSM-L AT VM.MARIST DOT EDU
cc

Subject
New hardware, new TSM version






Server W2k
TSM 5.1.5.0 and 5.1.7.0
Library: 3583 LTO1
 
I will upgrade both of my server to new hardware and run Windows 2003 on 
them. I will also upgrade to version 5.2.2.X (the 5.2.2 CD is delivered to 
me). I will upgrade my 3583 library to LTO2 drives. How can i move all my 
data to the new servers? Meaning all my MC, Policys, Schedules, scripts 
etc. Can I dump the database and restore it on the new server? Are there 
any good redbooks about this?
 
Thanks in advance.
 
/Larsa
 
Lars-Erik Öhman

IT Systems, servers and applications

 

Carnegie Investment Bank AB

Gustav Adolfstorg 18

103 38 Stockholm

tel. +46 8 676 88 14

www.carnegie.se <blocked::
file:///C:/Documents%20and%20Settings/larohm/Application%20Data/Microsoft/Signatures/www.carnegie.se
> 

 


This communication is from a Carnegie company within the Carnegie Group.

The information contained in it, including any attachment or enclosure, is 
intended only for the person or entity to which it is addressed and may 
contain confidential and/or privileged material. Any unauthorised use, 
review, retransmissions, dissemination, copying or other use of, or taking 
of any action in reliance upon, this information by persons or entities 
other than the intended recipient is prohibited. If you received this in 
error, please contact the sender and delete or shred the material 
immediately. Thank you.

Opinions, conclusions and other information expressed in this message are 
not given or endorsed by my firm or employer unless otherwise indicated by 
an authorised representative independent of this message.