Try to apply maintenance to TSM 5.2.3 available from ftp download site.

sandra

CORP Rick Willmore wrote:

> I use a scalar100 which is a 3583.  I dont believe this is a library issue 
> though .. rather a drive mapping issue.  Sounds like tsm isnt talking to the 
> drives.. ie.. sure you have the elements correct?  Has it ever worked?
>
> R.
>
> -----Original Message-----
> From: Moses Show [mailto:Moses.Show AT STPAUL DOT COM]
> Sent: Monday, September 27, 2004 10:37 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: 3583 library problems
>
> Hi people
>         Am running TSM server 5.2.20 using IBM 3583 LTO library as the
> backup device. However seem to have a problem with the drives. The paths
> to each of the drives are varied on, but it seems that every time I update
> the drives to a status of online, at least two of the drives go into a
> status of polling. Anytime I attempt to do an audit library to check the
> media in there the paths for the drives in the library seem to get varied
> off. Has anybody experienced this before and if so how did they get around
> this problem ?
> ==============================================================================
> This communication, together with any attachments hereto or links contained 
> herein, is for the sole use of the intended recipient(s) and may contain 
> information that is confidential or legally protected. If you are not the 
> intended recipient, you are hereby notified that any review, disclosure, 
> copying, dissemination, distribution or use of this communication is STRICTLY 
> PROHIBITED.  If you have received this communication in error, please notify 
> the sender immediately by return e-mail message and delete the original and 
> all copies of the communication, along with any attachments hereto or links 
> herein, from your system.
>
> ==============================================================================
> The St. Paul Travelers e-mail system made this annotation on 09/27/2004, 
> 01:38:33 PM.