OK.. I tryied this (I#ve used the tapeutil tool to move the tapes..) but when I
reply to the request.. the checkin process stopps with the message:
ANR0985I Process 181 for CHECKIN LIBVOLUME running in the
BACKGROUND completed with completion state FAILURE at
14:40:21.
It makes no different when I use a different tape..
Any ideas??
Robert
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
Otto Schakenbos
Sent: Donnerstag, 23. September 2004 14:02
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Problem with connection between TSM and Autoloader
Normally (that is as i know it), you first issue the checkin/label
command, then tsm checks for any free slots it can use for this new
tape, it will tell you the free slot and to put the new tape in it,(in
this case nr5 since 1-4 are already used), you load the tape in this
slot and issue a reply. Then tsm will checkin and label this tape.
There are also other options, like first loading all the tapes and then
use other syntax with the checkin/label command (search=yes etc), see
the manual for this.
regards
Otto Schakenbos
System Administrator
TEL: +49-7151/502 8468
FAX: +49-7151/502 8489
MOBILE: +49-172/7102715
E-MAIL: oschakenbos AT teleflex DOT com
TFX IT-Service AG
Fronackerstrasse 33-35
71332 Waiblingen
GERMANY
Mueller, Robert wrote:
>Hi!
>
>Greate.. now I have the LTO drive "Online" and 4 new tapes in slot 1-4 but,
>when i try to label and checkin them the system reports:
>
>ANR8306I 003: Insert LTO volume PTK_BVPN_LTO2_32 R/W into
> the slot with element number 5 of library 3581LIB_1
> within 33 minutes; issue 'REPLY' along with the request
> ID when ready.
>
>This LIBvolumename is completly unused.. and I'm asking me, why ask the TSM
>for slot 5???
>
>Sincerley
>Robert
>
>-----Original Message-----
>From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
>Loon, E.J. van - SPLXM
>Sent: Donnerstag, 23. September 2004 12:49
>To: ADSM-L AT VM.MARIST DOT EDU
>Subject: Re: Problem with connection between TSM and Autoloader
>
>
>Hi Robert!
>You specify a DEFINE DRIVE command while you refer to /dev/smc0 which is a
>library device. Use the DEFINE LIBRARY command.
>Kindest regards,
>Eric van Loon
>KLM Royal Dutch Airlines
>
>-----Original Message-----
>From: Mueller, Robert [mailto:robert.mueller AT BEARINGPOINT DOT COM]
>Sent: Thursday, September 23, 2004 12:29
>To: ADSM-L AT VM.MARIST DOT EDU
>Subject: Problem with connection between TSM and Autoloader
>
>
>Hi!
>
>I've a big problem with the connectivity between the TSM software and the
>tapedrive. I have installed the TSM Software (4,2..) on a AIX RS/6000 Server
>and a Utlrium Autoloader connected on a HVD Controller... When I try to
>access the Autoloader with the "tapeutil" toll, I can access teh autloader
>and test the device (move tapes, R/W tests... a.s.o) but when I try to
>define the drive in the TSM software the TSM reports an error message, that
>there is a I/O error...
>
>
>DEFINE DRIVE 3581LIB_1 LTO_DRIVE_1 DEVICE=/dev/smc0 ONLINE=YES
>ANR8420E DEFINE DRIVE: An I/O error occurred while accessing drive
>LTO_DRIVE_1.
>
>but, when the connectivity between the server and the autoloader is not
>working properly, it shouldn't be possible to connect via the tapeutil
>tool..
>
>
>Has anybody an idea, where the problem is???
>
>Sincerely
>Robert Mueller
>
>****************************************************************************
>***********************
>The information in this email is confidential and may be legally privileged.
>Access to this email by anyone other than the intended addressee is
>unauthorized. If you are not the intended recipient of this message, any
>review, disclosure, copying, distribution, retention, or any action taken or
>omitted to be taken in reliance on it is prohibited and may be unlawful. If
>you are not the intended recipient, please reply to or forward a copy of
>this message to the sender and delete the message, any attachments, and any
>copies thereof from your system.
>****************************************************************************
>***********************
>
>
>**********************************************************************
>For information, services and offers, please visit our web site:
>http://www.klm.com. This e-mail and any attachment may contain confidential
>and privileged material intended for the addressee only. If you are not the
>addressee, you are notified that no part of the e-mail or any attachment may
>be disclosed, copied or distributed, and that any other action related to this
>e-mail or attachment is strictly prohibited, and may be unlawful. If you have
>received this e-mail by error, please notify the sender immediately by return
>e-mail, and delete this message. Koninklijke Luchtvaart Maatschappij NV (KLM),
>its subsidiaries and/or its employees shall not be liable for the incorrect or
>incomplete transmission of this e-mail or any attachments, nor responsible for
>any delay in receipt.
>**********************************************************************
>
>***************************************************************************************************
>The information in this email is confidential and may be legally privileged.
>Access to this email by anyone other than the intended addressee is
>unauthorized. If you are not the intended recipient of this message, any
>review, disclosure, copying, distribution, retention, or any action taken or
>omitted to be taken in reliance on it is prohibited and may be unlawful. If
>you are not the intended recipient, please reply to or forward a copy of this
>message to the sender and delete the message, any attachments, and any copies
>thereof from your system.
>***************************************************************************************************
>
>
***************************************************************************************************
The information in this email is confidential and may be legally privileged.
Access to this email by anyone other than the intended addressee is
unauthorized. If you are not the intended recipient of this message, any
review, disclosure, copying, distribution, retention, or any action taken or
omitted to be taken in reliance on it is prohibited and may be unlawful. If
you are not the intended recipient, please reply to or forward a copy of this
message to the sender and delete the message, any attachments, and any copies
thereof from your system.
***************************************************************************************************
|
