Hi All,
Has anyone got any experience for connecting a Qualstar 8466 (with 2 x HP
LTO1 drive) to an IBM pSeries, so that I can use that library in
combination with TSM on that box.
Previously this Qualstar was connected to a W2K system with TSM, but that
system has become to small and we now want to move it to the pSeries which
has plenty capacity left.
When I run cfgmgr on AIX all I get is the two HP LTO1 drives but no
library/changer (see below):
# lscfg | grep "1Z-09"
+ scsi1 1Z-09 Wide/Ultra-3 SCSI I/O Controller
+ rmt1 1Z-09-00-1,0 Other SCSI Tape Drive
+ rmt2 1Z-09-00-2,0 Other SCSI Tape Drive
The library is on SCSI ID 0, so imho it should be visible to AIX.
Installing the Atape driver didn't do the trick either (I've tried a
couple of versions from 8.3.6 to 9.0.7).
Regards,
Richard.
|