Hallo,
I did every day.
1. checkin libv IBM3570COPY search=yes,checkl=b stat=scr
2. checkin libv IBM3570COPY search=yes,checkl=b stat=pri
If you monitor it you see that there are the scratch Tape checked in with
the error message that it couldn't checkin the privat tape as Scratch
Tapes.
Then you see the privat Tapes checked in.
Then you have to update the acces of the checked in private volumes to
readwrite (upd v <vol-ser> acc=readw).
mit freundlichen Grüßen \ best regards
Ralf Behrendt
WGZ-Bank
Organisation und Betrieb
- IT-Systeme -
Ludwig-Erhard-Alle 20
D - 40227 Düsseldorf
Telefon: +49 211 778 39 15
Telefax: +49 211 778 16 02
Handy: +49 170 576 44 15
mailto:ralf.behrendt AT wgz-bank DOT de
"ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU> schrieb am 29.06.2004
19:09:10:
> Hello,
> I don't understand...why would I want to check the tapes in as scratch if
> they already
> have data on them...why wouldn't I just physcially move them and then run
an
> audit
> library. At first you say to checkin my data tapes as scratch, but then
you
> say that
> private tapes cannot be checked in as scratch????
> Thanks,
> Bonnie
> -----Original Message-----
> From: Bos, Karel [mailto:Karel.Bos AT ATOSORIGIN DOT COM]
> Sent: Tuesday, June 29, 2004 11:00 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: From An ATL7100 to a P3000
>
> Hi,
> The database will still know the tapes (and the content of the tapes).
But
> you will have to do a checkin libv stat=scratch before doing checkin libv
> stat=priv. ITSM will let you checkin empty volumes as private, but will
not
> accept private tapes being checked in as scratch.
> Regards,
> Karel.
> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
> Argeropoulos, Bonnie
> Sent: dinsdag 29 juni 2004 16:34
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: From An ATL7100 to a P3000
>
> Hello,
> We are planning on changing our tape library from an ATL7100 to a P3000
and
> from four DLT7000 tape drives
> to six DLT8000 tape drives on an F50 running AIX 4.3.3 and TSM 5.1.62.
We
> are currently looking at putting our
> process for this change together and have found we have a few questions.
We
> thought we could delete the path to
> the drives, path to the library, the drives and then the library. We
would
> then connect the new library and physically
> move the DLT'4 tapes over to the new library and redefine everything. We
> are now concerned that if we delete the
> library will the database no longer know of the tapes? Would anyone have
> any suggestions or see any problems
> with this plan?
> Thanks for any help,
> Bonnie
> CONFIDENTIAL COMMUNICATION - PLEASE READ PRIVACY NOTICE
> This communication is confidential and may be read only by its intended
> recipient(s). It may contain legally privileged and protected
information.
> If you believe you have received this communication in error, please
"Reply"
> to the Sender and so indicate or call (603) 663-2800. Then, please
promptly
> "Delete" this communication from your computer. This communication, and
any
> information contained herein, may only be forwarded, printed, disclosed,
> copied or disseminated by those specifically authorized to do so.
> UNAUTHORIZED DISCLOSURE MAY RESULT IN LEGAL LIABILITY FOR THOSE PERSONS
> RESPONSIBLE.
> CONFIDENTIAL COMMUNICATION - PLEASE READ PRIVACY NOTICE
> This communication is confidential and may be read only by its intended
> recipient(s). It may contain legally privileged and protected
information.
> If you believe you have received this communication in error, please
"Reply"
> to the Sender and so indicate or call (603) 663-2800. Then, please
promptly
> "Delete" this communication from your computer. This communication, and
any
> information contained herein, may only be forwarded, printed, disclosed,
> copied or disseminated by those specifically authorized to do so.
> UNAUTHORIZED DISCLOSURE MAY RESULT IN LEGAL LIABILITY FOR THOSE PERSONS
> RESPONSIBLE.
Ueber das Internet versandte E-mails koennen leicht verfaelscht oder unter
fremdem Namen erstellt werden. Demzufolge muessen wir zu Ihrer und unserer
Sicherheit die rechtliche Verbindlichkeit der vorstehenden Erklaerungen
ausschließen. Der Versand von E-mail dient somit ausschließlich dem
Informationsaustausch.
Due to the fact that E-mails are prone to manipulation and can be
misleading as to the identity of the sender, the foregoing statements and
comments shall have no legal validity. This is for your own protection as
well as ours. Thus, E-mails shall be sent for information purposes only.
|
