Hi all,

A question on sharing a 3494-Library :

We have one 3494-Tape Library with 8 SCSI-Attached 3590E-drives. The Library
is connected to an AIX-Server via rs232. The library is only used by TSM.

Now we bought an extension Frame D22 with 4 FC-connected 3592-drives. These
drives should be used by a second AIX-server (running TSM).
My planning is to connect the second AIX-server via RS232 to the library,
and define library and new 3592-drives to TSM. Is this possible and does the
library support two servers connected and do I have to define anything on
the library side? Do I have to use different categories for each server
(even though the used drives and tapes are totally different and not
compatible) ?

Thanks for any help

Chris