ADSM-L

Re: Errors using tapes on H-drives in 3494

2003-12-10 17:30:47
Subject: Re: Errors using tapes on H-drives in 3494
From: Lloyd Dieter <dieter AT SNRGY DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Wed, 10 Dec 2003 17:30:32 -0500
Have those new scratch tapes been labelled?

-Lloyd

On Wed, 10 Dec 2003 23:15:34 +0100
brian welsh <brianwelsh3 AT HOTMAIL DOT COM> wrote thusly:

> Hello,
>
> TSM 5.1.7 on AIX 5.1, Library 3494 and 4x 3590 H-drives FC-attached.
>
> We are in the process of taking into production 4 new 3590 H-drives. We
> were using E-drives.
>
> Last weekend we set all the tape (1100) to read-only status, and
> check-in some new scratches (using collocation). Now we need to move
> data as soon as possible.
>
> When we start move data with a tape written on an E-drive, it moves the
> data to a scratch volume. So far so good, but when the scratch tape is
> defined in an storage pool we see the message anr8359, Media fault
> detected and status is changed again to read-only.
>
> Is this normal, and/or do we have to run some other commands on the
> tape?
>
> Two years ago we were in the same process from B-drives to E-drives, and
> have no trouble at all.
>
> Thanx,
>
> Brian.
>
> _________________________________________________________________
> MSN Zoeken helpt je om de gekste dingen te vinden! http://search.msn.nl
>


--
-----------------------------------------------------------------
    Lloyd Dieter        -       Senior Technology Consultant
                     Registered Linux User 285528
   Synergy, Inc.   http://www.synergyinc.cc   ldieter AT snrgy DOT com
             Main:585-389-1260    fax:585-389-1267
-----------------------------------------------------------------

<Prev in Thread] Current Thread [Next in Thread>