labeling failure
2003-10-06 15:28:29
Hi! Everyone!
I used the following command to add a storage volume xxxxx into our library
3584_library:
Checkin libvolume 3584_lib search=bulk status=scratch checklabel=barcode
And you can see the following results:
ANR8422I CHECKIN LIBVOLUME: Operation for library 3584_LIB started as process
4.
10/06/03 13:36:58 ANR0609I CHECKIN LIBVOLUME started as process 4.
10/06/03 13:37:43 ANR8431I CHECKIN LIBVOLUME process completed for library
3584_LIB; 2 volume(s) found.
10/06/03 13:37:43 ANR0985I Process 4 for CHECKIN LIBVOLUME running in the
BACKGROUND completed with completion state SUCCESS at 13:37:43.
but after about 20 minutes it generated the following error messages:
ANR8355E I/O error reading label for volume 000105 in drive 3584_DRIVE2
(/dev/rmt2).
ANR8778W Scratch volume 000105 changed to Private Status to prevent re-access.
ANR8355E I/O error reading label for volume 000106 in drive 3584_DRIVE2
(/dev/rmt2).
ANR8778W Scratch volume 000106 changed to Private Status to prevent re-access.
ANR8355E I/O error reading label for volume 000089 in drive 3584_DRIVE2
(/dev/rmt2).
ANR8778W Scratch volume 000089 changed to Private Status to prevent re-access.
I don't know what the matter is. Well, all those labeled tapes are new. I am
using library 3584 IBM and TSM in AIX Server.
I look forward to your reply. Regards.
Juan Reale.
________________________________________________________________________
This email has been scanned for all viruses by the MessageLabs service.
|
<Prev in Thread] |
Current Thread |
[Next in Thread>
|
- labeling failure,
Juan Jose Reale <=
|
|
|