ADSM-L

Re: media mount not possible

2003-09-16 11:16:26
Subject: Re: media mount not possible
From: Bill Zhang <aicc_us AT YAHOO DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Tue, 16 Sep 2003 08:16:07 -0700
Later,

Thanks a lot! I read the README.SRV. There is hope
now:) I will try it this evening.

Bill


--- Rejean Larivee <rlarivee AT CA.IBM DOT COM> wrote:
> Hello Bill,
> support for LTO Generation II drives was added
> in the 5.1.6.1 level of the server. This is
> described
> in the server README file.
> Once at a supported level, delete and redefine
> the drives in TSM so they are properly recognized
> as LTO II drives. They are most likely recognized
> as "generic" drive now which would be the cause
> for the ANR0535W message.
> Later,
>
-----------------------------------------------------------------
> Rejean Larivee
> IBM TSM/ADSM Level 2 Support
> Phone : (506) 638-7103  Tieline: 710-7103  Fax :
> (506) 638-7209
> Email   : rlarivee AT ca.ibm DOT com
>
>
>
>                       Bill Zhang
>                       <aicc_us AT YAHOO DOT CO        To:
>     ADSM-L AT VM.MARIST DOT EDU
>                       M>                       cc:
>                       Sent by: "ADSM:
> Subject:  media mount not possible
>                       Dist Stor
>                       Manager"
>                       <[email protected]
>                       .EDU>
>
>
>                       09/15/2003 09:13
>                       AM
>                       Please respond to
>                       "ADSM: Dist Stor
>                       Manager"
>
>
>
>
>
>
> hi all
>
> TSM Server 5.1.5
> Client 5.1.5
> AIX 5100-04
> Tape Library 3584 with 4 3580 drives
>
> I have 15 LTO 2 tapes in the library.
> I used Webadmin GUI to label the tape thinking they
> are checked in also, becuase I can see them in the
> Library Volumes window.
>
> I set the "MAX number allowed  scratch wolume" to 15
> for the tape pool 3584TAPEPOOL1.
>
> mount limit is DRIVES
>
> When I tried to make a full backup, it pop up a
> message
> "server media mount not possible" and in the log, it
> says
>
> ANR0535W  insufficient mount points available to
> satisfy the request.
>
> I don't know what is wrong.
>
> many thanks for your help
>
> Bill
>
> __________________________________
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site
> design software
> http://sitebuilder.yahoo.com


__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com

<Prev in Thread] Current Thread [Next in Thread>