Nguyen,
try to use command-line client, some operations *do not work* from the
wizard and I cannot recall about media labeling.
Open from Start -> Programs -> Tivoli Storage Manager -> Administrative
Command Line (if the icon is missing you will need to install the TSM
client selecting Administrative Client).
After logon to the server issue the following commands:
1. "Query LIBRary" (to see the library name for 3607-16X)
2. "Query LIBVolume <3607 lib>" (to see what is in the library)
3. "LABEl LIBVolume <3607 lib> SEARCH=Yes LABELSource=Bar CHECKIN=SCRatch"
(will label volumes and will checkin them as scratches)
In case of problems copy/paste the output of the commands back to the
list.
Zlatko Krastev
IT Consultant
Thanh Nguyen Duc <thanhnd AT FPT.COM DOT VN>
Sent by: "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
12.08.2003 20:43
Please respond to "ADSM: Dist Stor Manager"
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: TSM Labeling
Hi all!
We use two device: IBM 20/40GB DDS4 Internal Tape (FRU: 24P2414) and IBM
Tape Autoloader (P/N: 3607-16X) for testing.
The following is the result:
a.. We can label and backup data into the DDS4 tape cartridge.
b.. We can't label tape cartridge in tape autoloader. It always shows
message: "Unable to label volume xxxxx. The parameter is incorrect".
Although we install TSM 5.1.7 Patch to correct error IC36636 (The 5.1.5
TSM Server is unable to recognise the IBM 3607-16X Library) and enable
Multiple LUN Support in SCSIselectUtility for using IBM 3607-16X.
We try install TSM 5.2 but the result is the same (TSM 5.2 Patch is not
available now).
Labeling Media wizard:
1.. Click media labeling. Welcome to the Media Labeling Wizard screen
appears. Click Next.
2.. TSM Logon Information screen appears. Click Next.
3.. Device Selection for TSM Media Labeling screen appears (see picture
attached). Select the device and click Next.
4.. TSM Labeling for Autochanger Device screen appears (see picture
attached). Select the tape cartridge in library and enter the label. Click
Next.
5.. Media Labeling Monitor screen appears (see picture attached). It
shows the message: "Unable to label volume xxxxx. The parameter is
incorrect" and we fail to label the tape cartridge.
Our test configuration:
a.. IBM xSeries 225 (P/N: 8647-3AX)
a.. IBM ServeRAID-4Lx Utra160 SCSI Controller (P/N: 06P5740)
a.. Wide Ultra 160 SCSI Adapter (P/N:19K4646)
a.. IBM Tape Autoloader (P/N: 3607-16x)
a.. IBM 20/40GB DDS4 Internal Tape (FRU: 24P2414)
a.. TSM 5.1.5 (license) and TSM 5.1.7 Patch
a.. Windows 2K Server, SP4
--------------------------------------------------------------------------------
Nguyen Duc Thanh
FPT Software Solution-Government Business Unit
Address: 3th Fl, 51th, Ledaihanh.str, Haibatrung.dst, Hanoi, Vietnam
Tel: (84-4) 974-5451/974-5476, ext 304
Fax: (84-4) 974-5476
Mobile: (090) 411-9847
Website: www.fpt.com.vn
----- Original Message -----
From: Scott, Brian
To: ADSM-L AT VM.MARIST DOT EDU
Sent: Wednesday, August 13, 2003 12:27 AM
Subject: Re: Schedule for Domino backup
Patricia,
Take a look at your dsm.opt file for the TDP job and make sure you have
the
TCPCLIENTPORT set to a different port number than the TCPCLIENTPORT in
the
dsm.opt file for the Backup/Archive client jobs. I had the same problem
until I specified a separate port. Also, is it set for server prompted
or
client polling?
Regards,
Brian Scott
EDS - EOGDE
GM Distributed Management Systems Engineering
MS 3278
750 Tower Drive
Troy, MI 48098
* phone: +01-248-265-4596 (8-365)
* mailto:bscott AT eds DOT com
-----Original Message-----
From: LeBlanc, Patricia [mailto:Patricia.Leblanc AT LIBERTYMUTUAL DOT COM]
Sent: Tuesday, August 12, 2003 12:07 PM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Schedule for Domino backup
I have a schedule for my TDP for Domino that keeps failing with the
following error:
08/12/2003 11:51:51 Trying port number 56585
08/12/2003 11:51:51 Obtained new port number on which to listen.
08/12/2003
11:51:52 ANS1909E The scheduled command failed. 08/12/2003 11:51:52
ANS1512E
Scheduled event 'DOMINO_BACKUP' failed. Return code = 1.
I've searched the knowledge base and can't find anything helpful. I'm
on a
windows 2k box, tsm client version 5.1.1.5, tdp domino version 1.1.2,
unix
tsm server running 5.1.1.6.
Any ideas are appreciated!
pattie
|
