Hi to all the *SMers out there !

I just stumbled over the output of "q vol f=g", actually is was a typo, I
got no error Message but an output:

-------------
Volume Name: FRE660L1
Storage Pool Name: LTOPOOL
Device Class Name: LTOCLASS
Estimated Capacity (MB): 130,177.5
Pct Util: 20.1
Volume Status: Full
Volume Status (GUI): 2
Access: Read/Write
Access (GUI): 0
Pct. Reclaimable Space: 79.9
Scratch Volume?: Yes
Scratch Volume? (GUI): 1
In Error State?: No
In Error State? (GUI): 0
Number of Writable Sides: 1
Number of Times Mounted: 76
Write Pass Number: 1
Approx. Date Last Written: 08/10/2003 05:50:42
Approx. Date Last Read: 08/22/2003 13:52:56
Date Became Pending:
Number of Write Errors: 0
Number of Read Errors: 0
Volume Location:
Last Update by (administrator):
Last Update Date/Time: 08/05/2003 17:29:55
---------

Does anyone know what these "(GUI)"-outputs mean ? Or what they are good for
?
<command> f=g does also work with "q ses" and produces similar outputs also
containing this (GUI)-stuff. I didn't try any other commands yet.

Server is TSM 5.1.7.0 running under Windows2000AdvSrv.

Greetings,

Sascha Askani