Re: virtual write error on Raid-1
2003-08-06 07:20:03
Is there space in the filesystem? The MAXCAPACITY of the device class...is
there that much space available?
Bill Boyer
DSS, Inc.
-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
Salak Juraj
Sent: Wednesday, August 06, 2003 5:30 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: virtual write error on Raid-1
Hello all,
anyone has seen before?
TSM Server reports sometiems write error on a disk raid-1 volume,
while
neither an evidence about an error is elsewhere (Raid-Controller, event log)
nor I am able to provoke an write error wit a test program.
This problem occures sometimes, but not always,
when an reclamation process reclaimss an LTO tape to a disk volume
defined in
2003.08.05 11:41:50 ANR1340I Scratch volume
V:\TSM\RECLAIMPOOL1\00000DAA.BFS
is now defined in storage pool RECLAIMTPDB.
2003.08.05 11:47:11 ANR9999D pvrfil64.c(1056): ThreadId<30> Error
writing FILE
volume V:\TSM\RECLAIMPOOL1\00000DAA.BFS.
2003.08.05 11:47:11 ANR1411W Access mode for volume
V:\TSM\RECLAIMPOOL1\00000DAA.BFS now set to
"read-only"
due to write error.
TSM 5.1.7.0 on W2K SP3
IBM 345 with two Raid 4m controller, RAID-1 Disks
|
|
|