I have a question about setting up a new server. Currently, I've already
setup domains, stg pools, volumes, and schedules (but did not assign clients
yet). I am waiting for them to move over the tape library onto this new
server and I will define the library and drives. My question is, after the
library and drives are configured, how do I configure the data from disk stg
pools to know to go to the tape library? Below are comparison for the
current server (in production) and the new server (not yet running)
Thanks for your help.
Current server backing up in production:
adsm> q stg
Storage Device Estimated Pct Pct High
Low Next
Pool Name Class Name Capacity Util Migr Mig
Mig Storage
(MB) Pct
Pct Pool
----------- ---------- ---------- ----- ----- ----
--- -----------
ARCHIVEPOOL DISK 6.0 0.1 0.0 90
70
BACKUPPOOL DISK 11.0 0.0 0.0 90
70
CAP_POOL DISK 1,000.0 52.4 52.4 90
70 DLT_TAPEPO-
OL
CDE_POOL DISK 20,000.0 0.1 0.1 90
70 DLT_TAPEPO-
OL
DLT_COPYPO- DLT35G 0.0 0.0
OL
DLT_TAPEPO- DLT35G 214,748,36 0.5 1.5 90
70
OL 4.7
SKY_POOL DISK 8,000.0 1.9 1.9 90
70 DLT_TAPEPO-
OL
SPACEMGPOOL DISK 0.0 0.0 0.0 90
70
TEST_POOL DISK 2,500.0 78.2 78.2 90
70 DLT_TAPEPO-
OL
URET_POOL DISK 16,000.0 69.9 69.9 80
60 DLT_TAPEPO-
OL
New server (will be place in production when tested)
adsm> q stg
Storage Device Estimated Pct Pct High Low Next
Pool Name Class Name Capacity Util Migr Mig Mig Storage
(MB) Pct Pct Pool
----------- ---------- ---------- ----- ----- ---- --- -----------
ARCHIVEPOOL DISK 6.0 0.1 0.0 90 70
BACKUPPOOL DISK 11.0 0.0 0.0 90 70
DOM1_POOL DISK 20,000.0 0.0 0.0 90 70
DOM2_POOL DISK 20,000.0 0.0 0.0 90 70
DOM3_POOL DISK 20,000.0 0.0 0.0 90 70
DOM4_POOL DISK 20,000.0 0.0 0.0 90 70
DOM5_POOL DISK 20,000.0 0.0 0.0 90 70
SPACEMGPOOL DISK 0.0 0.0 0.0 90 70
|
