We just had the same problem today.

It turned out that the 'define drives' somehow inherited
device type GENERICTAPE while the storagepool had a deviceclass
that we defined with device type DLT (As we have a few DLT drives).

After creating a device class with device type 'GENERICTAPE' and
setting the storagepool to this new deviceclass everything started
to work (e.g migration, copy to copypool).

So compare q dr, q stg and q devcl to see if this is also your
'problem'.

-Marcel

On Thu, Jul 03, 2003 at 05:38:30PM -0700, Gerald Wichmann wrote:
> I've been playing with my single external LTO drive and having problems with
> the good ole "insufficient mount points available" error. I know getting TSM
> to work with a manual drive is quirky and am probably missing something but
> I'm able to label a cartridge fine using label libv so I assume the drive is
> defined properly and working. However whenever I try a migration or run a
> backup that forces a migration I get the insufficient mount points error.
>
> My devclass has DRIVES for mount limit.. I've also tried "1" there but it
> didn't help. My node in question has maxnump set to 1 which should be fine
> too. Looking for other suggestions if anyone has any.. I searched the adsm
> list archive and someone had mentioned doing a "reply" and that I had to
> mount the tape but that doesn't seem to be the case here. It never puts for
> a request for me to reply to. I've tried it both with the tape in the drive
> and without it in the drive. The tape has been labeled successfully but
> nothing shows up under "query libv" or "query vol". Far as I know you don't
> have to check in a manual tape do you? Maybe that's my problem..
>
> Gerald Wichmann
> Senior Systems Development Engineer
> ZANTAZ, Inc.
> 925.598.3099 (w)
>
>
>
> This e-mail has been captured and archived by the ZANTAZ Digital Safe(tm)
> service.  For more information, visit us at www.zantaz.com.
> IMPORTANT: This electronic mail message is intended only for the use of the
> individual or entity to which it is addressed and may contain information
> that is privileged, confidential or exempt from disclosure under applicable
> law.  If the reader of this message is not the intended recipient, or the
> employee or agent responsible for delivering this message to the intended
> recipient, you are hereby notified that any dissemination, distribution or
> copying of this communication is strictly prohibited.  If you have received
> this communication in error, please notify the sender immediately by
> telephone or directly reply to the original message(s) sent.  Thank you.

--
     ======--------         Marcel J.E. Mol                MESA Consulting B.V.
    =======---------        ph. +31-(0)6-54724868          P.O. Box 112
    =======---------        marcel AT mesa DOT nl                 2630 AC  
Nootdorp
__==== www.mesa.nl ---____U_n_i_x______I_n_t_e_r_n_e_t____ The Netherlands ____
 They couldn't think of a number,           Linux user 1148  --  counter.li.org
    so they gave me a name!  -- Rupert Hine  --  www.ruperthine.com