Hi John,

of course I have defined path to this library, both DEFINE LIBRARY and
DEFINE PATH commands are in devcnfg.out file (which is used in single-user
mode for device configuration, when you do DB restore), because TSM server
was operational OK  before restore and I have both devcnfg.out and
volhist.out files in server directory.

Here is part of devcnfg.out:
DEFINE LIBRARY STKINCCEAGLE LIBTYPE=EXTERNAL LANFREE=YES
OBEYMOUNTRETENTION=YES
DEFINE PATH TSMOPENSRV STKINCCEAGLE SRCTYPE=SERVER DESTTYPE=LIBRARY
EXTERNALMANAGER='c:\program files\GES\EDT\bin\elm.exe'

Any other idea?
With best regards
Tomas

> -----Original Message-----
> From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
> Henschell, John
> Sent: Monday, June 09, 2003 2:43 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: Restore DB problem
>
>
> Tomas,
>
> I saw these same errors setting up a TSM 5.2 server in an AIX environment
> going to a STK 9310 using Gresham EDT software.  I could do
> queries but not
> read/write to any tapes.  My problem was, after I defined the library I
> needed to run the define path command;
>
> >define path tsmservername stklibraryname srctype=external
> desttype=library
> externalmanager=/usr/lpp/dtelm/bin/elm
>
> The externalmanager path will be different.  I hope this helps
>
> John Henschell
>
> -----Original Message-----
> From: Toma9 Hrouda Ing. [mailto:throuda AT HTD DOT CZ]
> Sent: Monday, June 09, 2003 7:34 AM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Restore DB problem
>
>
> Hi all,
>
> I have a problem with restore DB from external library STK9310 PowderHorn
> managed by Gresham EDT on W2000 TSM server. This is restore of
> TSM server on
> the same machine with volume history file and devconfig file
> enabled. I did
> it many times successfuly with other libraries (almost local SCSI
> connected). I prepared DB and RL volumes the same size and location as
> original by DSMSERV FORMAT command and try to do restore DB
> (DSMSERV RESTORE
> DB TODATE=date). This is important part of output:
>
> ANR7800I DSMSERV generated at 09:17:48 on Nov  5 2002.
>
> Tivoli Storage Manager for Windows
> Version 5, Release 1, Level 5.2
>
> :
> :
>
> 5698-ISE (C) Copyright IBM Corporation 1999,2002. All rights reserved.
> U.S. Government Users Restricted Rights - Use, duplication or disclosure
> restricted by GSA ADP Schedule Contract with IBM Corporation.
>
> ANR8200I TCP/IP driver ready for connection with clients on port 1500.
> ANR0200I Recovery log assigned capacity is 200 megabytes.
> ANR0201I Database assigned capacity is 1000 megabytes.
> ANR4600I Processing volume history file volhist.out.
> ANR4620I Database backup series 90 operation 0 device class STKINCCEAGLE.
> ANR4622I   Volume 1: EH1143.
> ANR4634I Starting point-in-time database restore to date 06/03/2003
> 15:00:00.
> ANR0300I Recovery log format started; assigned capacity 200 megabytes.
> ANR9999D asvolmnt.c(3214): ThreadId<12> Unknown result code (132) from
> pvrOpen.
> ANR9999D icstream.c(1631): ThreadId<12> Error 87 opening input stream.
> ANR9999D icrest.c(2076): ThreadId<0> Rc=6 reading header record.
> ANR2032E RESTORE DB: Command failed - internal server error detected.
>
> Environment:
> TSM server 5.1.5.2 on W2000, Gresham EDT controled library STK9310 with 6x
> STK9840 FC drives, virtualized through SN/6000. I see all drives
> in system,
> Gresham is running and working good (I can do mounts, query ..etc).
>
> Do anybody have some idea what is the problem, or would I open PMR on IBM
> support?
>
> Many thanks
>
> Tomas Hrouda
> Storage Specialist
> HTD s.r.o. Praha
> CZECH REPUBLIC
> throuda AT htd DOT cz