Hi,
then do I have to use "shared" library?
Here is my library and drive config:
Library Name: LB0.4.0.5
Library Type: SCSI
ACS Id:
Private Category:
Scratch Category:
External Manager:
RSM Media Type:
Shared: Yes
LanFree:
ObeyMountRetention:
Primary Library Manager:
WWN: 2001006045172A98
Serial Number: IBM7815368
Last Update by (administrator): ADMIN
Last Update Date/Time: 04/23/2003 13:31:52
Library Name: LB0.4.0.5
Drive Name: MT0.2.0.5
Device Type: LTO
On-Line: Yes
Element: 256
Drive State: LOADED
Allocated to: B_TIVOLI1
WWN:
Serial Number: 6811154817
Last Update by (administrator): ADMIN
Last Update Date/Time: 04/18/2003 13:35:33
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Library Name: LB0.4.0.5
Drive Name: MT0.3.0.5
Device Type: LTO
On-Line: Yes
Element: 257
Drive State: EMPTY
Allocated to:
WWN:
Serial Number: 6811131774
Last Update by (administrator): ADMIN
Last Update Date/Time: 04/18/2003 13:36:07
Cleaning Frequency (Gigabytes/ASNEEDED/NONE): NONE
Is it good for LAN-FREE backup?
It is an IBM 3583 library attached to SAN. There is a TSM server, and some
Storage Agent.
The pathes and servers (Storage Agents) are defined.
But the backup data always go through the LAN.
Have anybody any idea?
Regards,
Gyorgy Hegedus
-----Original Message-----
From: Jozef Zatko
To: ADSM-L AT VM.MARIST DOT EDU
Sent: 4/23/2003 9:06 AM
Subject: Re: server free backup configuration
Hi,
it is OK that you do not see your library in web manager under SHARED
LIBRARIES.
SHARED LIBRARIES view contains libraries, which are connected to other
TSM
servers and this TSM server is library client, which have this library
defined with libtype=shared, which is not your case.
Regards
Ing. Jozef Zatko
Login a.s.
Dlha 2, Stupava
tel.: (421) (2) 60252618
Hegedus György
<hegedusgy@MEG To: ADSM-L AT VM.MARIST DOT EDU
ATREND.HU> cc:
Sent by: Subject: Re: server free
backup configuration
"ADSM: Dist
Stor Manager"
<ADSM-L AT VM DOT MAR
IST.EDU>
22.04.2003
17:56
Please respond
to "ADSM: Dist
Stor Manager"
Dear Gyula and Mark,
Thanks for your answers.
I managed to solve the mentioned problem. Now, I can use the QUERY SAN
command successfully. I had to choose the appropriate versions of HBA
driver
and SNIA HBAAPI (qlsdm.dll file).
Now, I try to work step by step. My next aim is to do a LAN-FREE backup
instead of SERVER-free.
I think, I configured everything (drives, library,...), but the backup
data
always go through the LAN. And there isn't any error.
But I realized a strange thing. The QUERY LIBRARY says, that the library
is
shared, however if I see it with the web management interface, I can't
see
any library under the "Shared Libraries" page. Is it possible?
GY
-----Original Message-----
From: Gyula Bereczky [mailto:bx AT DATATRANS DOT HU]
Sent: Thursday, April 17, 2003 9:36 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: server free backup configuration
On Wed, Apr 16, 2003 at 11:19:48PM -0500, Stapleton, Mark wrote:
> Keep in mind that a server-free backup environment requires a software
package such as Tivoli's SANergy in order to move data from disk to disk
within a SAN environment.
My understanding is, based on the V5.1 Administrator's Guide (windows),
that server-free backups can be done through a datamover device without
SANergy. It has really specific requirements tho, therefore I'm not 100%
sure that the HBA he mentioned supports it.
Should check the SAN GW microcode level too.
http://www-1.ibm.com/support/docview.wss?rs=663&context=SSGSG7&q=server+
free
&uid=swg21053219&loc=en_US&cs=utf-8&lang=en
--
bx
"Seize the day - I heard him say - life will not always be this way,
Look around, hear the sounds, cherish your life while you're still
around."
|
