Re: Converting I/O station into regular slots

WHen I added capacity to a 3583 library I had to reboot the WIn2k server
itself to get the change recognized in TSM. I tried just restarting TSM, but
I think it was more of a SCSI/driver issue. After the reboot of the Win2k
server, TSM recognized the new slots.

Bill Boyer
DSS, Inc.

-----Original Message-----
From: ADSM: Dist Stor Manager [mailto:ADSM-L AT VM.MARIST DOT EDU]On Behalf Of
Lambelet,Rene,VEVEY,GL-CSC
Sent: Thursday, February 27, 2003 11:31 AM
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Converting I/O station into regular slots


Hi, TSM server only knows about such hardware modifications at start time,
so stop/start it...

                Reni LAMBELET
                NESTEC  SA
                GLOBE - Global Business Excellence
                Central Support Center
                Information Technology
                Av. Nestli 55  CH-1800 Vevey (Switzerland)
                til +41 (0)21 924 35 43   fax +41 (0)21 703 30 17   local
UBS-Nestec, Bussigny
                mailto:rene.lambelet AT nestle DOT com

                This message is intended only for the use of the addressee
        and may contain information that is privileged and confidential.


-----Original Message-----
From: Paul van Dongen [mailto:paul AT VANGUARD-IT.COM DOT BR]
Sent: Thursday,27. February 2003 16:17
To: ADSM-L AT VM.MARIST DOT EDU
Subject: RES: Converting I/O station into regular slots


I've done this last week, only in the other way (storage to I/O). It
only worked after the TSM server was bounced.



--
Paul Gondim van Dongen
Engenheiro de Sistemas
MCSE
Tivoli Certified Consultant - Storage Manager
VANguard - Value Added Network guardians
http://www.vanguard-it.com.br
Fone: 55 81 3225-0353


-----Mensagem original-----
De: Camilo A. Marrugo [mailto:camilo AT DIALTONE DOT COM]
Enviada em: Thursday, February 27, 2003 12:17
Para: ADSM-L AT VM.MARIST DOT EDU
Assunto: Re: Converting I/O station into regular slots


Perfect, this did it. Now, here is another questions, I tried checking
the volumes that I placed on the I/O to be put in the libvol list but it
does not find anything new. Here is exactly what I have done:

-- Setup->Utils->Config-> I/O to storage
-- Reboot Library
-- Put library offline once its up and place cardtriges in the I/O
   (now   storage space slots) window
-- Run the following command:
        checkin libvol lto3583.0 search=yes status=scratch
-- It finishes successfully but it does not checkin any of the new 12
   tapes placed on the library I/O window.

Thanks in Advance,
Camilo Marrugo


On Tue, 2003-02-25 at 06:10, Richard Sims wrote:
> > I have a question, I am running out of physical space on my 3583
> > library, and I was wondering if there is a way of making the 12
> > slots on the I/O station (Bulk), part of the regular tape slots.
>
> The manual, of all things, says you can...
> via Setup->Utils->Config.
>
--
Camilo A. Marrugo
Data Storage Manager
Dialtone Interland
camilo AT dialtone DOT com - http://www.dialtone.com
Voice: 1.800.621.8309 ext. 1503  Toll Free

Confidentiality Note: The information transmitted is intended only for
the person or entity to whom or which it is addressed and may contain
confidential and/or privileged material. Any review, retransmission,
dissemination or other use of this information by persons or entities
other than the intended recipient is prohibited. If you receive this in
error, please delete this material immediately.