ADSM-L

Re: Problems defining a HP SureStore 20/700 LTO

2002-11-27 08:16:04
Subject: Re: Problems defining a HP SureStore 20/700 LTO
From: Wolfgang Bayrhof <wb AT CONSULTANT DOT COM>
To: ADSM-L AT VM.MARIST DOT EDU
Date: Wed, 27 Nov 2002 14:12:47 +0100
Hunny,

thanks for your reply. Your hint to lbtest.exe was very useful. Some commands 
with lbtest are working very well, but sometimes the same commands fails with 
I/O errors on one of the SCSI-buses. I've contacted the support of HP and 
they're just looking for errors on the hardware level.

bye,
Wolfgang



----- Original Message -----
From: Hunny Kershaw <hunnychka AT US.IBM DOT COM>
Date:         Wed, 27 Nov 2002 01:35:38 -0800
To: ADSM-L AT VM.MARIST DOT EDU
Subject: Re: Problems defining a HP SureStore 20/700 LTO


> Wolfgang,
>
> Find a TSM device driver utility called lbtest.exe. Then run "lbtest -d
> lb0.1.1.3" and choose manual test. Run option 6 to open, 8 to get element
> count and 9 to get inventory. Are these options successful? If fails,
> what's the error message?
>
> H.Kershaw
>
>
>
>
>
>                       Wolfgang Bayrhof
>                       <wb AT CONSULTANT DOT CO        To:       ADSM-L AT 
> VM.MARIST DOT EDU
>                       M>                       cc:
>                       Sent by: "ADSM:          Subject:  Problems defining a 
> HP SureStore 20/700 LTO
>                       Dist Stor
>                       Manager"
>                       <[email protected]
>                       .EDU>
>
>
>                       11/25/2002 04:54
>                       AM
>                       Please respond to
>                       "ADSM: Dist Stor
>                       Manager"
>
>
>
>
>
> Hi experts!
>
> I'm trying to set up a HP SureStore 20/700 with four LTO-Ultrium Drives and
> I'm having problems to define the library.
>
> Our environment:
>  - Windows 2000 Advanced Server SP1
>  - TSM 5.1.5.0 for Windows
>  - Compaq StorageWorks SAN Switches
>  - Emulex HBAs
>
> The commands I've tried:
>  DEFINE LIBRARY HPLIB1 LIBTYPE=SCSI SHARED=YES
>  DEFINE PATH TSM_W2K_1 HPLIB1 SRCTYPE=SERVER DESTTYPE=LIBRARY
> DEVICE=lb0.1.1.3
>
> The DEFINE PATH command ends with following error msg:
> ANR8418E DEFINE PATH: An I/O error occurred while accessing library HPLIB1.
> ANS8001I R|ckkehrcode 15.
>
> HP/Compaq tells Hardware is okay.
>
> Any suggestions?
>
> Thanks in advance.
>
> Best regards,
> Wolfgang Bayrhof
>
>
> --
> __________________________________________________________
> Sign-up for your own FREE Personalized E-mail at Mail.com
> http://www.mail.com/?sr=signup
>
> One click access to the Top Search Engines
> http://www.exactsearchbar.com/mailcom
>

--
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup

One click access to the Top Search Engines
http://www.exactsearchbar.com/mailcom