Re: Parallel Backup Paths for TDP R/3
2002-08-20 14:04:57
Joel --
Two items.
First, in order to use parallel paths, you have to split your MAX_SESSIONS
between them. If yo really want to run just seven sessions, then server_a
should be set for 4 ( or 3) sessions. The sessions get allocated in the
server_stanza order, so leaving server_b at 8 allows for up to 8 sessions
even if the server is not answering at server_a.
Second, in order to use two network interfaces for outbound traffic they
need to be on seperate *networks*. If your netmask isn't 255.255.255.128 or
higher on these two interfaces the traffic will all go out on the
lowest-numbered IP address; restores would all be by the 10.10.10.1
interface.
I'm doing this currently; my 'public' (open to the corporation) network is
10.8.X.X; my internal SAP Database Access network is 192.168.196.X (these
are both 100 Mb), and my two backup networks are 192.168.194.X and
192.168.195.X respectively.
Ethernet cards and backplane slots are cheap, in the great scheme of things,
so all my RS/6000 gear is coming in with at least 5 network interfaces (I
also have an admin network that grew out of the old SP 'reliable ethernet'
at 192.168.193.X).
HTH --
Tom Kauffman
NIBCO, Inc
> -----Original Message-----
> From: Tait, Joel [mailto:Joel.Tait AT CCRA-ADRC.GC DOT CA]
> Sent: Monday, August 19, 2002 3:14 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Parallel Backup Paths for TDP R/3
>
>
> Hi,
>
> When I try to use Parallel backup paths for TDP R/3, I
> receive the following
> error message when trying to connect to the same TSM server
> on two different
> Network Adapters:
>
> Tivoli Data Protection for R/3
> Interface between SAPDBA Utilities and Tivoli Storage Manager
> - Version 3, Release 2, Level 0.4 for WinNT -
> Build: 138O
> compiled on Aug 1 2001 (c) Copyright IBM Corporation,
> 1996, 2001,
> All Rights Reserved.
> BKI0005I: Start of backint program at: 08/19/02 15:01:16 .
> BKI1214E: TSM Error: '!S!'
>
> -- Parameters --
> Input File : G:\oracle\PV1\sapbackup\.bdirmimw.lst
> Output File :
> Profile : e:\oracle\PV1\817\database\initPV1.utl
> Configfile : E:\oracle\PV1\817\database\initPV1.bki
> Manual sorting file : disabled
> Tracefile : disabled
> Traceflags : disabled
> Parallel sessions : 7
> Multiplexed files : 1
> RL compression : 1
> TCPWait : 1
> Retries to TSM : 3
> Retries for files : 3
> Exit on error : disabled
> BATCH : enabled
> Buffer size : 32768
> Redologcopies : disabled
> Versioning : enabled
> Current Version : 17
> Backup Type : file
> SNMPTRAP : disabled
> TSM log server : disabled
> TSM server : SERVER_A with 8 sessions configured,
> using 7 session
> TSM client node :
> TSM server version : 4.2.1.7
> TSM server ip : 10.10.10.1
> TSM server name : SD07X661.N
> TSM server type : Windows NT
> Sign-in id name : PV1
> Compression : client determined
> Archive deletion : allowed
> Days for backup : Sun Mon Tue Wed Thu Fri Sat
> Backup mgmt class : DB
> Archiv mgmt class : LOG
> TSM server : [SERVER_B]
> My initSID.utl
>
> #*************************************************************
> *************
> # Statement for multiple Servers and multiple Paths.
> # may be used multiple times (one for each server).
> #*************************************************************
> *************
>
> SERVER server_a # Servername
> SESSIONS 8 # Max sessions
> PASSWORDREQUIRED YES # Use a password
> ADSMNODE PV1
> BRBACKUPMGTCLASS DB # Mgmt-Classes
> BRARCHIVEMGTCLASS LOG # Mgmt-Classes
>
> SERVER server_b # Servername
> SESSIONS 8 # Max sessions
> PASSWORDREQUIRED YES # Use a password
> ADSMNODE PV1 # Tivoli Storage
> Manager Nodename
> BRBACKUPMGTCLASS DB # Mgmt-Classes
> BRARCHIVEMGTCLASS LOG # Mgmt-Classes
>
>
> Server_a connects fine, Server_b does not connect.
>
>
> My server_a.opt
>
> COMMmethod TCPIP
> SLOWINCR NO
> COMPression OFF
> NODEname PV1
> TCPPort 1500
> TCPServeraddress 10.10.10.1
> PASSWORDACCESS PROMPT
> LARGECOMMBUFFER NO
> TCPBUFFSIZE 31
> TCPWINDOWSIZE 2048
>
> My server_b.opt
>
> COMMmethod TCPIP
> SLOWINCR NO
> COMPression OFF
> NODEname PV1
> TCPPort 1500
> TCPServeraddress 10.10.10.101
> PASSWORDACCESS PROMPT
> LARGECOMMBUFFER NO
> TCPBUFFSIZE 31
> TCPWINDOWSIZE 2048
>
> Environment
>
> TSM Server 4.2.1.7
> 2 Giganet Lan adapters
> Win2K
>
> TSM 4.2.X
> TDP R/3 3.2.0.4
> 2 Giganet Lan adapters
> Win2K
>
> Thanks
>
> JET
>
>
|
|
|