Sorry Geir,
it seems to be me! I tried netscape from a box next to the server and
it worked - must be something in the lan back to the office or my
laptop setup...
regards Nigel
On Wednesday 07 Aug 2002 3:05 pm, you wrote:
> Hi again,
> it was my first thought. Otther than that, check for messages during
> startup - TSM usually says something about http port opened, or
> initialized...
>
> Rgds.
> G. G. Halvorsen
>
> -----Original Message-----
> From: Nigel Howard [mailto:nhoward AT SYNSTAR DOT COM]
> Sent: 7. august 2002 15:38
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: Re: http webadmin problem
>
>
> Hello Geirr,
> thanks for reply, but yes they are defined, 'q opt' follows:
> ...everything is defaulted at the moment
>
> tsm: TSM>q opt
>
> Server Option Option Setting Server Option Option
> Setting ----------------- -------------------- -----------------
> --------------------
> CommTimeOut 60 IdleTimeOut 15
> BufPoolSize 2048 LogPoolSize 512
> DateFormat 1 (mm/dd/yyyy) TimeFormat 1 (hh:mm:ss)
> NumberFormat 1 (1,000.00) MessageFormat 1
> Language en_US MaxSessions 25
> ExpInterval 24 ExpQuiet No
> EventServerLoggi- Yes MirrorRead DB Normal
> ng
> MirrorRead LOG Normal MirrorWrite DB Sequential
> MirrorWrite LOG Parallel TxnGroupMax 40
> MoveBatchSize 40 MoveSizeThresh 500
> StatusMsgCnt 10 RestoreInterval 1,440
> UseLargeBuffers Yes DisableScheds No
> AuditStorage Yes REQSYSauthoutfile Yes
> SELFTUNEBUFpools- No SELFTUNETXNsize No
> ize
> DBPAGEShadow No DBPAGESHADOWFile dbpgshdw.bdt
> QueryAuth None
> TCPPort 1500 HTTPPort 1580
> HTTPSPort 1543 TCPWindowsize 0
> TCPBufsize 16384 TCPNoDelay Yes
> IPXSocket 8522 NetbiosBufferSize 16384
> NetbiosSessions 25 LuName DSMSERV1
> TPNProfilename TPNAME dsmserv
> IPXBufferSize 4096 CommMethod TCPIP
> CommMethod HTTP MsgInterval 1
> Enable3590Library No ShmPort 1510
> FileExit UserExit
> FileTextExit AssistVCRRecovery Yes
> AcsAccessId AcsTimeoutX 1
> AcsLockDrive No AcsQuickInit No
> SNMPSubagentPort 1521 SNMPSubagentHost 127.0.0.1
> SNMPHeartBeatInt 5 TECHost
> more... (<ENTER> to continue, 'C' to cancel)
>
> TECPort 0
>
> On Wednesday 07 Aug 2002 2:24 pm, you wrote:
> > HI Nigel,
> > have you checked your dsmserv.opt for commmethod http and httpport
> > 1580?
> >
> > Rgds.
> > Geirr G. Halvorsen
> >
> > -----Original Message-----
> > From: Nigel Howard [mailto:nhoward AT SYNSTAR DOT COM]
> > Sent: 7. august 2002 12:42
> > To: ADSM-L AT VM.MARIST DOT EDU
> > Subject: http webadmin problem
> >
> >
> > hello,
> > I have setup tsm servers before and not hit this problem.
> > I can connect on the command line but when I http to 1580, the
> > connection halts.
> > I have tried tsm 4.2 and 4.1 and now gone back to 3.7 which used to
> > work fine.
> > It is on a private lan and to rule out the network, I have tried a
> > cross cable between my laptop and the server.
> > I have tried two different servers j40 and c20.
> > I have tried my usual linux mdk82 and then win2k to connect with.
> > Every browser just sits there till it times out...
> >
> > I know it's probably something obvious, I have even gone back to my
> > manual from the course.
> >
> > regards Nigel
|