ADSM-L

Problem using HP DLT VS80 with TSM 5.1.1 on Win2000

2002-07-02 09:16:09
Subject: Problem using HP DLT VS80 with TSM 5.1.1 on Win2000
From: Imre Kloknicer <ikloknicer AT EU.INFOBAL DOT COM>
Date: Tue, 2 Jul 2002 14:58:23 +0200
Hi all,

I'm new to the list, this is my first post.
I've just installed a TSM server on an IBM xSeries machine. The machine
is equipped with an HP DLT VS80 internal tape drive, but TSM will not
write to tape. The error message I'm getting is (using TSM device
driver):

ANR8302E I/O error on drive DLT_VS80 (mt1.0.0.2) (OP=WRITE, Error
Number=87, CC=207, KEY=05, ASC=24, ASCQ=00,
SENSE=F0.00.05.00.00.00.01.16.00.00.00.00.24.00.00.CF.00.02.82.00.00.00.
00.00.-
15.00.9A.BB.A4.,
Description=Device is not in a state capable of performing request).
Refer to Appendix D in the 'Messages' manual for recommended action.

I tried to use the operating system device driver (with GENERICTAPE
device), the result was:

ANR8328I 002: GENERICTAPE volume SAL01 mounted in drive DLT_VS80
(mt1.0.0.2).
ANR8311E An I/O error occurred while accessing drive DLT_VS80
(mt1.0.0.2) for WRITE operation, errno = 1.

The hardware setup is probably correct since the TapeWare application
that came with the drive is capable of performing backup on this
machine.
Anybody has an idea what I can do with it?

Thanks in advance,
Imre Kloknicer
<Prev in Thread] Current Thread [Next in Thread>