Re: ADSM 3.1 to 4.2.1 Migration
2002-06-12 17:53:19
Subject: |
Re: ADSM 3.1 to 4.2.1 Migration |
From: |
Robert Molerio <rjm AT PANIX DOT COM> |
Date: |
Wed, 12 Jun 2002 17:51:27 -0400 |
Sounds like you'll be ok but check the AIX upgrade first . I did it hat way
and it worked ok.
On Wed, 12 Jun 2002, Marc D. Taylor wrote:
> Hello Again,
>
> Since we are getting a new library we are also getting new server hardware
> and going to TSM 4.2.1 (5 will be later). Therefore, we have a 2 way
> upgrade (old software to new software, old server to new server).
>
> I gave TSM support a call and asked what their recommended procedure was
> and I found out that they really don't have any, but the tech support guy
> who responded gave me a procedure that he says has worked for others.
>
> In our case, we need to upgrade the OS on the old server (still at 4.2.1)
> to 4.3.3. Do an update install of TSM on top of what we have now. Export
> the database after it has been transformed by the update/install to tape.
>
> Take the export tape and import it into the new server (along with the old
> tape libraries). Then migrate the data from the old library to the new
> library.
>
> Is this what others have done? I have seen snippets of other things being
> done, but usually it appears that server hardware remained the same.
>
> TIA for all of your comments.
>
> Marc
>
> ===============================
> Marc D. Taylor
> Research Programmer
> Beckman Institute Systems Services
> Room 1714
> Office: 217-244-7373, Fax: 217-333-8206
> mdtaylor AT uiuc DOT edu
> http://biss.beckman.uiuc.edu
>
|
|
|