Re: unloaddb problem
2002-04-19 06:55:06
Subject: |
Re: unloaddb problem |
From: |
Pétur Eyþórsson <peddi AT ITN DOT IS> |
Date: |
Fri, 19 Apr 2002 10:50:04 -0000 |
to clarify for you more Burak,
If you can label the tapes, that only tells you that your tape drive is
working, not the device class.
My guess is that your device class type is incorrect.
and you need to check also if your mount limit is not 0 as Prasad mentioned.
default when you create the device class the mount limit is Drives. so I am
quite sure that isn't the problem.
But you need to check your drive with the command Q drive f=d and see if the
device type is the same as in your device class.
Kvedja/Regards
Petur Eythorsson
Taeknimadur/Technician
IBM Certified Specialist - AIX
Tivoli Storage Manager Certified Professional
Microsoft Certified System Engineer
peddi AT itn DOT is
Nyherji Hf Simi TEL: +354-569-7700
Borgartun 37 105 Iceland
URL: http://www.nyherji.is
|
|
|