Re: Library
2002-04-08 10:31:07
Keith,
Did you ever resolve this? If you're having a problem accessing the drives it
could be a problem with Windows since TSM connects through Windows drivers to
IBm drives (IBM drives are not supported natively by TSM).
On W2K check under Computer Management->Removable Storage->Physical Locations,
you should see all your drives listed, check the property of each one and make
sure it's enabled.
Also under Device Manager check to see if each drive is there and there isn't a
yellow <!> over the device.
Make sure you have the correct driver loaded for the Firmware Level of the
drive. Normally you have to update the Windwos driver after updating the
hardware firmware.
If all this checks out, delete the drives and library from TSM and re-setup
library and drives for TSM.
If you have any questions please let me know.
john
|
|
|