Re: Volume Problem
2002-04-02 08:40:04
try audit vol command with fix=yes option then upgrade your TSM server
to avoid further problems
joni.moyer AT HIGHMARK DOT COM
Sent by: ADSM-L AT VM.MARIST DOT EDU
02.04.2002 16:07
Please respond to ADSM-L
To: ADSM-L AT VM.MARIST DOT EDU
cc:
Subject: Volume Problem
Hi!
I am running reclamation for a copy pool and there are two tapes in the
pool that have reclaimed all of the data except for the last 1%.
Reclamation runs and pulls these volumes in about every hour(I don't have
reclamation jobs set to run at certain times).
04/01/2002 00:56:46 ANR1040I Space reclamation started for volume 491674,
storage pool TAPECOPYSPMGNT (process number 12).
04/01/2002 00:56:46 ANR1040I Space reclamation started for volume 483401,
storage pool TAPECOPYSPMGNT (process number 12).
04/01/2002 01:31:38 ANR1040I Space reclamation started for volume 491674,
storage pool TAPECOPYSPMGNT (process number 16).
04/01/2002 01:31:38 ANR1040I Space reclamation started for volume 483401,
storage pool TAPECOPYSPMGNT (process number 16).
04/01/2002 01:32:46 ANR1040I Space reclamation started for volume 491674,
storage pool TAPECOPYSPMGNT (process number 17).
04/01/2002 01:32:46 ANR1040I Space reclamation started for volume 483401,
storage pool TAPECOPYSPMGNT (process number 17).
04/01/2002 01:56:46 ANR1040I Space reclamation started for volume 491674,
storage pool TAPECOPYSPMGNT (process number 18).
04/01/2002 01:56:46 ANR1040I Space reclamation started for volume 483401,
storage pool TAPECOPYSPMGNT (process number 18).
I brought the tapes back from the vault and tried to do a MOVE DATA, but
when I try this I get the message: ANR2209W Volume 483401 contains no
data.
When I do a q vol I get the following:
Volume Name Storage Device Estimated Pct
Volume
Pool Name Class Name Capacity Util
Status
(MB)
------------------------ ----------- ---------- --------- -----
----
--------
--------
483401 TAPECOPYS- TAPEOFF3- 483401
TAPECOPYS- TAPEOFF3- 11,427.6 1.0 Full
PMGNT 590
Which leads me to believe that there is information on the tape. I have
even also tried to delete the information off of the tape and that doesn't
work either. I don't know what else to do to get these tapes to scratch.
Any suggestions?? Thanks!!!
Joni Moyer
Associate Systems Programmer
joni.moyer AT highmark DOT com
(717)975-8338
|
|
|