Re: virtual volumes?
2002-03-14 10:05:11
I believe you need the copygroup defined as "type=archive", not the default
"type=backup"...
(maybe not the only thing missing..)
> -----Original Message-----
> From: Wholey, Joseph (TGA\MLOL) [mailto:JWholey AT EXCHANGE.ML DOT COM]
> Sent: Wednesday, March 13, 2002 9:08 PM
> To: ADSM-L AT VM.MARIST DOT EDU
> Subject: virtual volumes?
>
>
> I could really use some help on this one...
>
> TSMv4.1.3 server on S/390
> TSMv4.1.5 server on AIX-RS/6000
>
> I set up server to server communications. All works well.
> I set up virtual volumes from the TSM RS/6000 to the TSM S/390 server.
> All looked well until I noticed that the utilization on the tape pool I
thought I was writing to never
> changed. Upon further investigation, I noticed I was writing to a disk
pool. Can't
> figure out how it's happening. e.g. I direct data (backup db type=full
dev=vvol) to the
> device class vvol, which of course is devtype server, it's
> going to a storage pool that writes to disk. Unfortunately,
> this is not how I set this up. I suspect it has something to do with my
copygroup
> or mgmtclass... here's the output of 4 queries... I know it's
> quite a bit to look at, but I'd appreciate if someone could
> shed some light on this one. I'm a little confused.
>
> tsm: ADSM-ML-WSTP>q co virtual-vols virtual-policy f=d
>
> Policy Domain Name: VIRTUAL-VOLS
> Policy Set Name: VIRTUAL-POLICY
> Mgmt Class Name: VV-DEFAULT
> Copy Group Name: STANDARD
> Copy Group Type: Backup
<<<<=============<<<<<
> Versions Data Exists: 2
> Versions Data Deleted: 1
> Retain Extra Versions: 30
> Retain Only Version: 60
> Copy Mode: Modified
> Copy Serialization: Shared Static
> Copy Frequency: 0
> Copy Destination: VLDB-POOL
> Last Update by (administrator): TGADSJW
> Last Update Date/Time: 11/14/2001 11:22:08
> Managing profile:
> ************************************************************
|
|
|