ADSM-L

3584 amd SDG R03

2015-10-04 17:12:13
Subject: 3584 amd SDG R03
To: ADSM-L AT VM.MARIST DOT EDU=20

Hi

We have a 3584 with 3 drives; 2 are SCSI attached through a San Data
Gateway
R03, and one drive is direct FC attached to a switch.

We're using this library with a IBM P-Series 610 with one FC adapter.

The problem is that the performance of the 2 SCSI drives attached to the
SDG
is very poor. The FC drive has a good performance and can reach speeds up
to
27MB/s, but the SDG will only reach about 4-5MB/s, which shoulod mean
2-2.5MB/s per drive.

The 3584 drives(both SCSI and FC) are upgraded to the last level of
=66irmware(was done a week ago), and the library is at level 2250.

Is this a know problem with the San Data Gateway? We should at least be
able
to reach about 10-15MB/s thought the SAN Data Gateway.

Appreciates any help I can get.



Best Regards

Daniel Sparrman



**********************************************************************
=46or information, services and offers, please visit our web site:
http://www.klm.com. This e-mail and any attachment may contain confidential
and privileged material intended for the addressee only. If you are not the
addressee, you are notified that no part of the e-mail or any attachment
may be disclosed, copied or distributed, and that any other action related
to this e-mail or attachment is strictly prohibited, and may be unlawful.
If you have received this e-mail by error, please notify the sender
immediately by return e-mail, and delete this message. Koninklijke
Luchtvaart Maatschappij NV (KLM), its subsidiaries and/or its employees
shall not be liable for the incorrect or incomplete transmission of this
e-mail or any attachments, nor responsible for any delay in receipt.
**********************************************************************



"MMS <health-first.org>" made the following
 annotations on 02/13/02 19:44:55
---------------------------------------------------------------------------=
---
---
This message is for the named person's use only.  It may contain =
This message is for the named person's use only.  It may contain =
confidential, proprietary, or legally privileged information.  No =
confidentiality or privilege is waived or lost by any mistransmission.  If =
you receive this message in error, please immediately delete it and all =
copies of it from your system, destroy any hard copies of it, and notify th=
e=
 sender.  You must not, directly or indirectly, use, disclose, distribute, =
print, or copy any part of this message if you are not the intended =
recipient.  Health First reserves the right to monitor all e-mail =
communications through its networks.  Any views or opinions expressed in =
this message are solely those of the individual sender, except (1) where th=
e=
 message states such views or opinions are on behalf of a particular entity=
;=
  and (2) the sender is authorized by the entity to give such views or =
opinions.

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D
<Prev in Thread] Current Thread [Next in Thread>