Look in "Using the Windows Backup-Archive Client" guide:
"The tcpport option specifies a TCP/IP port address for a server. You can 
obtain this address from your administrator. "
So putting a line 'tcpport 1501' in your dsm.opt file on NT server node 
will help. And for HTTP you will have to use http://your_tsm_server:1581/ 
instead of http://tsm:1580/.

The port numbers 1501 and 1581 are defaults values but are not open/used by 
default. Port 1501 is used on the client only if 'SCHEDmode PRompt' is 
used. And port 1581 is used only if Web Client Acceptor Daemon (dsmcad) 
service is started. So if they are not used there is no need to configure 
or change them.

Zlatko Krastev
IT Consultant





Juergen Heinrich <jheinrich AT VERDI-AG DOT COM> on 28.11.2001 10:34:49
Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To:     ADSM-L AT VM.MARIST DOT EDU
cc: 

Subject:        Antwort: Changing TCP and HTTP ports

Hi Kien,

the ports 1501 and 1581 are used as default ports for the TSM Client. If 
you are
planning to change
the server ports you have to also change the client ports.

Sincerly

Juergen Heinrich

Verdi Information Consult GmbH
Systemsmanagement
Niederlassung Berlin
Wittestraße 30K
D-13509 Berlin

http://www.verdi-ag.com