Hi i am having a serious problem.
The Workplace:
TSM Server 4.2.1.4 "Windows NT"
Qualstar Library TLS-8433 (Firmware 2.12)
IBM Ultrium 3580 drives (Firmware 16E0)
The situation is like this:
When i move data or run Space Reclimation i constatnly recive I/O errors from
TSM Server due to a Read and Write errors.
they look like this
tsm: AGNES_SERVER1>q actlog begind=-1 search=SENSE
Date/Time Message
-------------------- -------------------------------------------------------
---
---
11/05/2001 13:59:01 ANR8302E I/O error on drive LTODRV2 (\\.\TAPE1)
11/05/2001 13:59:01 ANR8302E I/O error on drive LTODRV2 (\\.\TAPE1)
(OP=READ,
Error Number=121, CC=0, KEY=00, ASC=00, ASCQ=00,
SENSE=**NONE**, Description=An undetermined error has
occurred). Refer to Appendix D in the 'Messages'
manual
for recommended action.
11/05/2001 13:59:01 ANR8302E I/O error on drive LTODRV1 (\\.\TAPE0)
(OP=WRITE,
Error Number=121, CC=0, KEY=00, ASC=00, ASCQ=00,
SENSE=**NONE**, Description=An undetermined error has
occurred). Refer to Appendix D in the 'Messages'
manual
for recommended action.
11/05/2001 14:00:03 ANR8300E I/O error on library LTOLIB1 (OP=8401C058,
CC=317, KEY=05, ASC=3B, ASCQ=90,
SENSE=70.00.05.00.00.00.00.0A.00.00.00.00.3B.90.00.C0.00-
.04., Description=Media is not ejected from source
drive). Refer to Appendix D in the 'Messages' manual
for
recommended action.
11/05/2001 14:01:02 ANR8300E I/O error on library LTOLIB1 (OP=8401C058,
CC=317, KEY=05, ASC=3B, ASCQ=90,
SENSE=70.00.05.00.00.00.00.0A.00.00.00.00.3B.90.00.C0.00-
.04., Description=Media is not ejected from source
drive). Refer to Appendix D in the 'Messages' manual
for
recommended action.
11/05/2001 16:24:08 ANR8302E I/O error on drive LTODRV2 (\\.\TAPE1)
(OP=WRITE,
Error Number=121, CC=0, KEY=00, ASC=00, ASCQ=00,
SENSE=**NONE**, Description=An undetermined error has
I don4t know if this is the problem but every time i restart my machine i get
these 2 errors in my "System Event Log"
"The description for Event ID ( 0 ) in Source ( Ultrium ) could not be found.
It contains the following insertion string(s): \Device\Tape0."
and this one
"The description for Event ID ( 0 ) in Source ( Ultrium ) could not be found.
It contains the following insertion string(s): \Device\Tape1."
I am using "IBM Ultrium Tape Drivers (3580, T200, TX200)
they are version "1.1.7.7"
When i am getting these I/O Errors i am getting these errors in my "System
Event Log"
First this one
"The device, \Device\ScsiPort1, did not respond within the timeout period. "
Then this one
"A check condition error has occured on device \Device\lb0.0.0.1 during Move
Medium with completion code DD_MEDIA_NOT_EJECTED. Refer to the device's SCSI
reference for appropriate action.
Dump Data: byte 0x3E=KEY, byte 0x3D=ASC, byte 0x3C=ASCQ "
This is what i have tryed so far.
I have changed the SCSI Terminator.
I have changed the SCSI Atapder.
I have changed all the SCSI Cabels.
Please Help me
I promise to send the one who solve this a 6pack.
:)
Kind Regards
Petur Eythorsson
Peddi AT itn DOT is
Nyherji
Iceland
-------------------------------------------------------
^essi skilabop voru send mep vefpssti Fjarskiptafilagsins Tmtan.
^essi skilabop voru send mep vefpssti Fjarskiptafilagsins Tmtan.
Slspin er: http://postur.itn.is/
|