ADSM-L

Re: What version of TSM and SAN DATAgateway and 3590 scsi drives work?

2001-09-21 12:21:08
Subject: Re: What version of TSM and SAN DATAgateway and 3590 scsi drives work?
From: Zlatko Krastev/ACIT <acit AT ATTGLOBAL DOT NET>
Date: Fri, 21 Sep 2001 19:23:14 +0300
As the site says: THE LATEST.

As the SAN technology is still new and there is much work to be done.
Upgrade the latest (IMHO get also the one before it) microcode for SAN Data
Gateway and the fabric (if you add it later).
Upgrade the Atapi and atldd drivers. Upgrade by yourself or ask IBM CE to
upgrade tape device microcodes.
Try first with the latest TSM (or again the one before it) - I do already
got v4.2 but preferred to install v4.1.4.1 and play with v4.2 in the
sandbox.

So you got my $0.02  :-))


Zlatko Krastev
IT Consultant






Rick Un <Rick.Un AT DYNEGY DOT COM> on 19.09.2001 18:37:05
Please respond to "ADSM: Dist Stor Manager" <ADSM-L AT VM.MARIST DOT EDU>
To:     ADSM-L AT VM.MARIST DOT EDU
cc:

Subject:        What version of TSM and SAN DATAgateway and 3590 scsi
drives work?

Hey, I was just wondering what version of TSM people are using in TSM land
that work with this config (or similar one)

IBM San DataGateway 2108 model G07 with scsi ports.  ON those scsi port
there are 4 IBM 3590 drives.  This is connected to a fibre channel switch
and then to an IBM 6227 card on a model h80 and h70 running AIX version
4.3.3.

Ok, so what version of these particular filesets are people using, that
works in a drive sharing config (where all 4 drives are seen and online on
both servers while they share this resource)

tivoli.tsm.server.rte
tivoli.tsm.devices.fcprte

Thanks in advance.

rick un
<Prev in Thread] Current Thread [Next in Thread>